3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

pulled the turbos to replace intake gasket

Old Jun 19, 2005 | 12:27 PM
  #1  
jefjarski's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 38
Likes: 0
From: melbourne florida
Question pulled the turbos to replace intake gasket

got the new gaskets installed ,thanks to ray at malloy,turbos back on but on startup im running really rich with 0 boost on gauge ,ithink it might be a electrical connecter under the vac box on top of engine, it is blue and i cant find its mate.any body got time to look,this job was to fix leak from warming port on rear side of intake where it mates to engine major work that started as small exhuast leak i thought it was down pipe leak,might have crossed a couple of vac lines 1 was melted thru 230.00 in gaskets,i dont want to pull the tubos back out,
Reply
Old Jun 19, 2005 | 12:29 PM
  #2  
turbojeff's Avatar
Do it right, do it once
Tenured Member 15 Years
iTrader: (30)
 
Joined: Apr 2001
Posts: 4,830
Likes: 14
From: Eugene, OR, usa
The blue connector is the EGR connector for 93 Cal and 94 FDs only. It will not change the way the car runs.

I'd take a look at the MAP sensor hose located near the brake booster.
Reply
Old Jun 19, 2005 | 12:40 PM
  #3  
jefjarski's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 38
Likes: 0
From: melbourne florida
this is weird but here goes ...i love you man, the 7 is sounding sweet with no exhuast leak hard to believe 1 hose can create havoc ,thanks again
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
FD7KiD
3rd Generation Specific (1993-2002)
15
Feb 26, 2021 10:12 PM
Kyo
2nd Generation Specific (1986-1992)
6
Apr 13, 2019 09:24 AM
FD7KiD
Single Turbo RX-7's
1
Aug 17, 2015 11:50 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:39 AM.