Profec B Spec II wiring question
06-17-06, 10:43 AM
#1
Rotary Enthusiast
Thread Starter
iTrader: (5)
Join Date: Mar 2005
Location: Boxford, MA
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Profec B Spec II wiring question
I accidentally yanked the wires out of the back of the solenoid wiring harness on the solenoid end. I can just put another connector on, but I'd like to know for sure which wire connects to which. If anybody could snap a picture of the connection to their profec solenoid that would be great, but telling me in words would be fine too. I wasn't able to find any pictures that showed what I need when I searched. Thanks
06-17-06, 05:24 PM
#3
Originally Posted by Maximum
Surprised nobody knew off the top of their head...
brb
The pinkish red wire coming from the solenoid goes to the green wire. On the back of the controller the green wire plugs into the left side of the harness if your looking at the controller from the back.
Is that what u were looking for?
Last edited by Lupercal_CATS; 06-17-06 at 05:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM