spyfish007

I've had a GReddy FMIC (2-row) for about about 2 years now. I've had an annoying problem since that date and mainly because as we all know the directions are so bad. Thanks to a little motivation from RatedR1 by putting a new hood prop retaining clip on my car yesterday, I decided to fix my problem.

Well my problem was that my the hood prop had NO chance of ever clippling in place and the pipes always seemed to be off alignment, but I could make it work. I started realigning my radiator and AC condensor mounts and got them both to be mounted a little more vertical. Then after flipping around my lower cold side pipe, the angle was finally correct. I had originally tried this fix, but as the radiator and AC condensor were incorrectly positioned, the pipe would not fit. As it turns out the sticker on the pipe was also labeled incorrectly, which gave me the original "false" hope. My point is just keep trying to get everything aligned with the GReddy FMIC and it will line up.

CCarlisi

I like what you did with the Y-pipe crossover. I was thinking of having a pipe made for my Efini Y so I could do the same thing, but now thinking about going single so that project is on hold :-p

spyfish007

I'm glad you like it. It usually takes people a few moments to figure out what is bothering them about my engine.

mr.zoom

iTrader: (1)

Mine was like that too
took me hrs trying to make it fit right, then I thought its just a sticker, could be backwards. it was.