3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Ppf......

Thread Tools
 
Search this Thread
 
Old 02-06-02, 10:52 AM
  #1  
Senior Member

Thread Starter
 
Dragueur's Avatar
 
Join Date: Aug 2001
Location: Sacramento
Posts: 483
Likes: 0
Received 0 Likes on 0 Posts
Exclamation Ppf......

there were topics awhile back about SOMETHING RATTLING under the CAR.......and thoughts were the PPF....... or the PLATE that covers the tranny.....

if it WAS the PPF(mines rattling) would it rattle with the ENGINE off...PARKED BUT the system on??
i have 2 10W3 JLs.....weak AMP( kicker 180 watts ) and a jl component system NOT amped up....... would the system CAUSE the PPF to rattle also?? cause it DOES....must it be the PLATE now???

95 Base MB
Old 02-06-02, 11:08 AM
  #2  
Lives on the Forum

 
DamonB's Avatar
 
Join Date: Feb 2001
Location: Dallas
Posts: 9,617
Likes: 0
Received 8 Likes on 7 Posts
If your PPF ever were to rattle, it's time for another one. Lots of things could easily rattle under the car: the splash shield either side of the driveshaft, the heat sheild above the muffler can, the heat sheild around the cat...Just get under there and do some poking around.
Old 02-06-02, 11:26 AM
  #3  
uid 0

 
SanJoRX7's Avatar
 
Join Date: Mar 2001
Location: San Francisco, CA
Posts: 858
Likes: 0
Received 1 Like on 1 Post
Yeah, I concur with DamonB. Best to just get under the car (take a 10mm socket) and start checking on the most obvious stuff. The tranny cover is a really light piece of metal, so if that rattled, you'd definitely hear it. If you have a torque wrench, torque everything to spec just to be sure.
Old 02-06-02, 11:51 AM
  #4  
Senior Member

Thread Starter
 
Dragueur's Avatar
 
Join Date: Aug 2001
Location: Sacramento
Posts: 483
Likes: 0
Received 0 Likes on 0 Posts
i was lookin under the car when it was rattling....it was coming from the CAT.....like NEXT to it or around that general area........i DONT even know where the PPF is.....HOPEFULLY its just a shield....
Old 02-06-02, 12:09 PM
  #5  
Hamado things my way!

 
P'cola FD's Avatar
 
Join Date: Oct 2001
Location: Pensacola, Florida
Posts: 1,245
Likes: 0
Received 0 Likes on 0 Posts
The power plant frame (ppf) is the basically the motor mounts and frame work of the car. I have never heard of that rattling. I had a couple of rattles that I tracked down to the heat sheild on the turbos and the heat shield around the cat piping.
Old 02-06-02, 12:17 PM
  #6  
Senior Member

Thread Starter
 
Dragueur's Avatar
 
Join Date: Aug 2001
Location: Sacramento
Posts: 483
Likes: 0
Received 0 Likes on 0 Posts
Exclamation thanks......

ill go to the shop this weekend BEFORE ALL STAR events and check it out....
Old 02-06-02, 01:03 PM
  #7  
Meesto Spakaro

 
BlackR1's Avatar
 
Join Date: May 2001
Location: Redondo Beach, CA
Posts: 489
Likes: 0
Received 0 Likes on 0 Posts
What DamonB and SanJo said... just go under the car and check all your bolts... I had a heat shield come loose while driving which made a horrible sound. Really easy fix-- doesn't take too much hard driving to rattle those bolts loose. PPF makes a distinct clunking/popping sound while you are driving.
Old 02-06-02, 05:42 PM
  #8  
Senior Member

Thread Starter
 
Dragueur's Avatar
 
Join Date: Aug 2001
Location: Sacramento
Posts: 483
Likes: 0
Received 0 Likes on 0 Posts
oK!!! just got back from changin my oil......
it was the PLATE next to the cat....the bolt was half way out..TIGHTENed it..and now its FINE!!!




All times are GMT -5. The time now is 05:42 AM.