the hose attached to the power steering tank is leaking

and mazda doesn't seem to sell it separately...

anyone knows the type and the size of this hose?

thanks a lot !!

 

thanks

 

The OD of the hardline is 12mm / 1/2"
So you would need 12mm or 1/2" ID hose.

You can get power steering rated hose from most auto parts stores

 

when you replace the hose, I would recommend upgrading the clamps as well

 

^+1,
it may not even be the hose itself that's leaking, It may be the clamps not sealing properly.

 

The mazda oem part is only like $9. And yes the stock clamps usually leak. I have the part number at the shop is you want it.

 

yes please send me the part number

thank you!

 

still leaking after tightening the clamps, thanks any way

 

Remind me Monday.

 

ok thank you

 

I replaced mine with 1/2" power steering line, its was a tight fit but worked. I got the line from autozone the guy at the counter cut me a small section for free. I also replace the clamps with constant tension hose clamps so they don't dig into the line.

 

the Mazda number is FD01-32-688

 

thank you!!!!!

 

I replaced mine with a piece of fuel hose and new worm drive clamps.
Hasn't leaked a drop in a year and cost less than $5 from Advance Auto.

 

Does anyone know the part number for the o ring


[/QUOTE]

 

not available separtely... you have to buy the kit

FD1532610

https://www.amayama.com/en/catalogs/...ng-system-2785

any fuel grade o-ring will work fine

 

Did you happen to know if this is the o ring I’m talking about

 

The picture looks like a copper gasket, not an o-ring?

This is the kit you need to get any of the o-ring, or you can get some generic o-ring by size.



The kit will not have this small o-ring, but will have the one that fit in the power steering pump groove.

 

^That gasket is probably in between the halves of the PS pump itself. Or it's for some other car .

Dale

 

Thank you. Appreciate the help