possible oil blow by?
Thread Starter
Eats, Sleeps, Dreams Rotary
Joined: Nov 2003
Posts: 3,082
Likes: 0
From: kali
possible oil blow by?
ok well i have been doing my single conversion and nearing completion
well heres my question, my kit came with a -6 ss line and fitting and i know thats too big, but i dont really wanna rip everything out and replace the line again
but i saw this
http://www.atpturbo.com/Merchant2/me...egory_Code=OIL
i was wondewring instead of replacing the whole feed line for like a -3 just use this on the tubo and my 1/8 to -6 fitting then to my -6 ss line
is the restrictor too small???
o i have a 60-1 turbo
any help would be awesome
thanx
mike
well heres my question, my kit came with a -6 ss line and fitting and i know thats too big, but i dont really wanna rip everything out and replace the line again
but i saw this
http://www.atpturbo.com/Merchant2/me...egory_Code=OIL
i was wondewring instead of replacing the whole feed line for like a -3 just use this on the tubo and my 1/8 to -6 fitting then to my -6 ss line
is the restrictor too small???
o i have a 60-1 turbo
any help would be awesome
thanx
mike
apex seal BBQ
Joined: Sep 2002
Posts: 867
Likes: 1
From: AL
If you use a -6 line for a feed on a T-series turbo you need a restrictor, preferably 1.5 mm. I believe the ATP fitting is a 1.5 mm (0.060 in = 1.524mm). I am running -6 feeds with 1.5mm restrictors on both of my turbos and haven't had any problems yet.
Thread Starter
Eats, Sleeps, Dreams Rotary
Joined: Nov 2003
Posts: 3,082
Likes: 0
From: kali
Originally Posted by broken93
If you use a -6 line for a feed on a T-series turbo you need a restrictor, preferably 1.5 mm. I believe the ATP fitting is a 1.5 mm (0.060 in = 1.524mm). I am running -6 feeds with 1.5mm restrictors on both of my turbos and haven't had any problems yet.
Thread
Thread Starter
Forum
Replies
Last Post
yetter227
2nd Generation Specific (1986-1992)
20
Sep 5, 2015 11:57 PM