Please I Need Help With My Avcr Install
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Maryland, GERMANTOWN
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Please I Need Help With My Avcr Install
Man i have been trying to put this avcr in but i cant get it working rite, as far as the hose i did it just like the book but what im foggy on is the disconnect of the solinode valve is that the one near the upper man and vac tank with 2 hose going into each, i took out the bottom 2 and plugged them up,, im getting no boost at 4500rmp what can be wrong please anybody
#3
Make sure the BOV signal line is hooked up to the manifold between the throttle plates and the engine. The stock connection point on the UIM is a good spot. If you have something else T'ed in the same line, it might not be getting a proper signal.
What's an RSM, and what is 45 ps?
-Max
What's an RSM, and what is 45 ps?
-Max
#4
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Maryland, GERMANTOWN
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
hey max well it was a false alarm lol man im so glad ok i was thinking really hard on what steps i took and i pray asking god to help me, and boy did he, when i was taking out the stock intake i put a plastic bag in the lower turbo intake line and forgot to take it out, when i got home from work i look at the line and sure enough it was in there. and the boost problem was becuase of me not connecting the y piping line to the intercooler lol i know duuuuuuhhhhh. but none the lesss its working find and thanks for your input, oh yea RMS is the apex rev;speed meter, and its measured in PS not HP
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM