An pics of Silver FD with 99 Spec front end?
#4
Senior Member
Join Date: Oct 2001
Location: Washington, DC
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 spec
Originally posted by am3210
Is this a shaved Mazda front or a fiberglass copy?
Is this a shaved Mazda front or a fiberglass copy?
He explained that it is a major job to do the plate shaving perfectly. When I say perfectly I mean looking like it was molded that way from the factory and using flexible epoxy and urethane to patch up the hole where the license plate was. The epoxy alone is hundreds of $$$, then it is a total bitch to get the curvature of the nose right... we are talking hours and hours of molding, sanding, resanding, reapplying epoxy, resanding... etc. It of course is easier to get a fiberglass replica front nose but then you get all the problems that go with it.
Just an FYI to those out there who are considering this.
Soctt
#5
Rebreaking things
Join Date: Jun 2001
Location: 1 foot in Boston 1 in NJ
Posts: 2,586
Likes: 0
Received 0 Likes
on
0 Posts
not worth the energy imo. I think it looks fine with the plate mount and a trimmed license plate. The major downside in my mind is it will give the cops a nice target to nail with a radar/laser gun. It might look neat if you turned it into an intake vent instead. Not sure about how functional it would be though.
#7
Originally posted by CCarlisi
The major downside in my mind is it will give the cops a nice target to nail with a radar/laser gun
The major downside in my mind is it will give the cops a nice target to nail with a radar/laser gun
This has always been my main concern.
That car looks freagin awesome!!!! DAMMIT I WANT A SILVER CAR
Trending Topics
#14
thats not paint....
That is the Apexi IC. Not my car but I found it a while back (only pic I have). The original picture had a front plate but someone photoshoped it. You can buy a 99' replica w/o a front plate spot. Here is a shot of a real one. It is from Pettit at $550.
#16
Junior Member
Thread Starter
Join Date: Apr 2001
Location: Toronto, ON, CAN
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 7-sins
That is the Apexi IC. Not my car but I found it a while back (only pic I have). The original picture had a front plate but someone photoshoped it. You can buy a 99' replica w/o a front plate spot. Here is a shot of a real one. It is from Pettit at $550.
That is the Apexi IC. Not my car but I found it a while back (only pic I have). The original picture had a front plate but someone photoshoped it. You can buy a 99' replica w/o a front plate spot. Here is a shot of a real one. It is from Pettit at $550.
Do those rims look like 18s or 17s?
Dan
#18
Full Member
Join Date: Mar 2002
Location: Miami
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
My body shop is having problems installing my 99 front end. My car has never been hit and the piece is rubber or urethane (not fiberglass). They shaved off the front plate and did a pretty decent job rounding it out but i think they used putty, and they cannot get the damn thing flush ( gap between hood and quarterpanels even)
Is this a usual problem or are they incompetent idiots that need to be taken out back and shot close range execution style with a D. E. 44?
Is this a usual problem or are they incompetent idiots that need to be taken out back and shot close range execution style with a D. E. 44?
Thread
Thread Starter
Forum
Replies
Last Post