pfc comander problem fixed!!!!! detailed write up
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
pfc comander problem fixed!!!!! detailed write up
just wanted to let u guys know that my pfc commander problem last night has been solved
https://www.rx7club.com/showthread.p...=1#post3895156
basicaly i got the guts to open the commander up (no warranty anyways so what the hell)
there are 2 phillips heads on the lower backside of the commander that need to be removed
and the rest are just snaps, crack it open with tiny screwdriver for eye glass
after opening i noticed that the wires on the bottom were all connected to the board except for one ( its brown!!!!)
so i just got a fine soldering wire and mild soldering iron, and reattached it
make sure u dont keep the iron on the board too long, i just tap it on the board a coulple times and got it reconnected
before u put it back together make sure you test it, mine came alive again
and yeh clean off the clear display from the inside, mine had lint all over
after that just put the phillips screws back ( do not overtighten )and snap back the rest of the cover
and YOUR DONE!! and think about this u just saved yourself 300 bux for a new comander
good luck on your fix
thanx
mike
https://www.rx7club.com/showthread.p...=1#post3895156
basicaly i got the guts to open the commander up (no warranty anyways so what the hell)
there are 2 phillips heads on the lower backside of the commander that need to be removed
and the rest are just snaps, crack it open with tiny screwdriver for eye glass
after opening i noticed that the wires on the bottom were all connected to the board except for one ( its brown!!!!)
so i just got a fine soldering wire and mild soldering iron, and reattached it
make sure u dont keep the iron on the board too long, i just tap it on the board a coulple times and got it reconnected
before u put it back together make sure you test it, mine came alive again
and yeh clean off the clear display from the inside, mine had lint all over
after that just put the phillips screws back ( do not overtighten )and snap back the rest of the cover
and YOUR DONE!! and think about this u just saved yourself 300 bux for a new comander
good luck on your fix
thanx
mike
Last edited by rotoboy661; 01-06-05 at 02:01 PM.
#2
RX-7 Bad Ass
iTrader: (55)
Glad you whupped it! Many times with solid-state electronics it's a simple fix like that. Good job!
Dale
Dale
#3
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
How did your commander act before you fixed it?
I also have a problem with it, it's stuck on APEX-i the first display after I turn the ignition on, doesn't move even if I press any button.
Great fix man, I'll give it a shot and see if anything is loose in there.
Thanks for sharing...
I also have a problem with it, it's stuck on APEX-i the first display after I turn the ignition on, doesn't move even if I press any button.
Great fix man, I'll give it a shot and see if anything is loose in there.
Thanks for sharing...
#6
Originally Posted by TwinTurbo93
How did your commander act before you fixed it?
I also have a problem with it, it's stuck on APEX-i the first display after I turn the ignition on, doesn't move even if I press any button.
Great fix man, I'll give it a shot and see if anything is loose in there.
Thanks for sharing...
I also have a problem with it, it's stuck on APEX-i the first display after I turn the ignition on, doesn't move even if I press any button.
Great fix man, I'll give it a shot and see if anything is loose in there.
Thanks for sharing...
#7
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nextelbuddy
thats the same problem he had.. so if yours is doing this then follow his write up and you are good to go
I gues I missed his original thread where he posted the problem, wow, same problem as mine... I got a good chances...
Thanks again...
Trending Topics
#10
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tom93R1
I sort of did the same thing a couple months back but I opened it up and had 2 disconnected wires. I re-soldered them and the thing works now but still no light. Oh well, one of these days I will get it.
burned out LED's???
im getting mine in amber to match my dash light
GL tom
#12
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tom93R1
My backlight went out, it was the same time the entire commander died so I think it is just one of the wires still just needs to be re-connected. Probably I did a bad soldering job.
i know someone that can restore the BL to any color u want
#14
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TwinTurbo93
I read alot of posts people having problems with they're commander, how the hell this thing is made so fragile, so cheap????
this was just a simple fix
not too worried yet
#15
Wouldn't Go If U Paid Me
Join Date: Nov 2003
Location: Clayton, NC
Posts: 3,036
Likes: 0
Received 0 Likes
on
0 Posts
i dunno the whole damn thing seems pretty simple to me. I have plans separating the two boards, relocating the screen, and putting the pad elsewhere. The whole thing seems like it could be made quite a bit smaller and detracts from most interior setups.
anyhow good to hear that it was such a simple fix.
anyhow good to hear that it was such a simple fix.
#16
Rotary Freak
Join Date: Sep 2004
Location: Bay Area, CA
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotoboy661
yeh
whats funny is if u cant fic ur commander one day
whats funny is if u cant fic ur commander one day
If i do need to fix my commander some day I'll be sure to pull up your write-up and get all the details
#18
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rotoboy661
beats me, electronics fry sometime
this was just a simple fix
not too worried yet
this was just a simple fix
not too worried yet
#19
0-rotor-0-turbo-0-fd
Join Date: Sep 2002
Location: NYC
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
#20
Eats, Sleeps, Dreams Rotary
Thread Starter
Join Date: Nov 2003
Location: kali
Posts: 3,083
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TwinTurbo93
glad to hear that u saved 300 bux like me
hey ill post pics wehen i get the back light in amber
mike
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
rkhanso
2nd Generation Specific (1986-1992)
1
08-13-15 11:40 AM