Pettit Underdrive Pulley

Reply Subscribe

Thread Tools

Search this Thread

02-05-09, 09:22 AM

Rixio_Scon

400Rwhp Seq Twins Baby!!

Thread Starter

Join Date: Mar 2006

Location: "Sunny" ol England

Posts: 362

Likes: 0

Received 0 Likes on 0 Posts

Pettit Underdrive Pulley

My pulley doesnt want to line up with my timing gear...Has anybody else had this problem?

Also does anybody know the correct belt size for NO A/C, NO Air Pump, Pettit Alternator & Underdrive Pulley

Reply Like

02-05-09, 09:31 AM

Chadwick

Mr Sparkles

iTrader: (12)

Join Date: Jun 2001

Location: Smyrna, TN, USA

Posts: 785

Likes: 0

Received 1 Like on 1 Post

Quote:

Originally Posted by Rixio_Scon

My pulley doesnt want to line up with my timing gear...Has anybody else had this problem?

Also does anybody know the correct belt size for NO A/C, NO Air Pump, Pettit Alternator & Underdrive Pulley

You have it lined up wrong, the two smaller holes are where the alignment pins go. Turn it about 90 degrees and it should line up

Dan

Reply Like

02-05-09, 09:47 AM

Rixio_Scon

400Rwhp Seq Twins Baby!!

Thread Starter

Join Date: Mar 2006

Location: "Sunny" ol England

Posts: 362

Likes: 0

Received 0 Likes on 0 Posts

Quote:

Originally Posted by Chadwick

You have it lined up wrong, the two smaller holes are where the alignment pins go. Turn it about 90 degrees and it should line up

Dan

Sorry...The pins that you can see are the allen screws to bolt it on. The pic is just to illustrate the miss-alignment

When the alignment pins are in the smaller holes on the timing gear the Pettit pulley only allows 2 screws to go in.

I'll double check anyway just incase. Your probably right