Pettit AST question
#1
Senior Member
Thread Starter
Pettit AST question
ok heres a retarded Q, what is the proper way to remove the saftey cap off the ast,
is it lift up saftey lever, then twist and remove
of lift up saftey lever wait till pressures released then put it back down then twist and remove....
because i bought a 16psi replacement, and the lever for the cap does not stay up like the on pettit supplied, I'd lift the lever and it will snap back down when i let go
so just wondering..
is it lift up saftey lever, then twist and remove
of lift up saftey lever wait till pressures released then put it back down then twist and remove....
because i bought a 16psi replacement, and the lever for the cap does not stay up like the on pettit supplied, I'd lift the lever and it will snap back down when i let go
so just wondering..
#4
Rotary Freak
Originally posted by Lost Time
I would take the cap off the filler neck to release any pressure that might be in the system before removing the ast cap. And protect your eyes.
I would take the cap off the filler neck to release any pressure that might be in the system before removing the ast cap. And protect your eyes.
Trending Topics
#8
lift lever releasing pressure(use a rag and read the warning on the cap), push down and twist left. Leave lever up when unscrewing.
Last edited by Toadman; 04-05-02 at 04:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM