rob007

i just bought an exhaust system for my fd from ssautochrome on ebay, 3" stainless steel catback with downpipe.
What do you think about it?? The thing is... what to do with the original midpipe...should i keep it? fabricate one resonated? install a 3" hight performance cat? I know i can gain 60hp with a full 3" exhaust and good intake system but i prefer to cut on power a little to lower the sound.... so tell me what would you do!


Its a 93 fd fully original...

adam c

iTrader: (2)

This belongs in the 3rd gen section. If you don't want it loud, keep the stock cat. If you want thoughts about your exhaust, provide a link to information.

If you do a search, you may find the info more quickly.

lopedl

iTrader: (1)

well for starters if you have an otherwise stock setup ie computer, intercooler ect. Adding the 3" midpipe isn't what you want to do, regardless of how it sounds or doesn't, you'll be playing on a fine line to blowing your motor.

rob007

Ok, well thats good to know...thanks!

Zakktheaxman

Hi I Have A Blitz Nur Spec Fitted To My Fd But Tomorrow I Should Be Decatting It,
I Could Post A Video If It Would Be Any Help To You.

Zakktheaxman

Forgot To Add The Decat Pipe Is An Unsilenced Pipe From Rx7store

93rxt

a 3inch catback is gonna be loud as hell under load. and wether you remove or keep the cat isnt going to make much of a sound difference. with the 3 inch and im guessing its a striaght through muffler the only thing you can do to quiet it down is to install a resonator. or 2 depending on how quiet you want it.

dontlift

He asked that question back in 2004...

wapita

Hhaha...maybe he still wants to know