Installed the greddy front mount but now it idles like **** what do i do with the hose that went into the old throttle body.I got the greddy elbow.The car sounds like it has a cam in it.And it stalls if you try driving it.

 

First thing I would do is check for any vaccum leaks.

 

do you have a gauge to tell you how much vac you are pulling

 

yes i have the power fc and i use the boost gauge on that and it is reading 35 normAL
518

 

check your map sensor?

 

YEa, check the map sensor hose. I bet that popped off.
You can use a small K&N filter on the hose that was hooked up to the stock elbow.

Jason

 

where is the map sensor correct me if im wrong its the tube that came off the old elbow and which end popped of the end where the old elbow went or the part that goes under the intake manifold

 

It's neither, the MAP sensor is a little rectangular black box, and it is mounted on the driver side firewall. There is a 4 mm vacuum hose attached to the bottom of it.
When you installed the Greddy elbow, did you plug the hose that went to the stock elbow??

 

yes and i still hear a whistling noise

 

Have you taken your airpump off or installed a performance intake?? Did you do anything else when you installed the intercooler? As long as that hose that went on to the back of the elbow is plugged and your map sensor hose didn't pop off, then you shouldn't have any problems. Do you have any color smoke coming out of the tail pipe?

 

Guys...Thanks alot ,i fixed it, changed spark plugs car was flooded bad...