So im finishing up my engine/ single conversion and wanted to know where you guys run the vacume lines from the oil injectors? i've been told to run the to the intake mani so they see boost to push more oil in and i've seen just to atmosphere? which is it?

 

I don't know about them pushing more oil in if they see boost, but the factory lines run to the intake side of the turbo(before the compresser)

 

Run them to the FRONT of the Turbo air inlet. Incorporate a nipple there and connect the single 6mm hose from both injectors. They will see a slight vacuum from where air is sucked into the Turbo

tom

 

What he said. Thats where they are stock why would you change it.

 

You do not have to hook them to a vacuum source at all. Most of the older builders do not .I learned that from Ari at RP in Texas and mine have been open for several years.So have many others I know of .

 

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/what-these-485752/

 

Mahjik is a stud.