Anyone know if this will fit? http://www.frsport.com/Setrab-Oil-Co...ml#productDesc

And if not anyone have a recomendation for a larger oil cooler to go in the stock location on the drivers side? Looking for a high capacity cooler that will fit without issues. By issues I mean having to cut the bumper up.

 

I would check this thread, or pm wan about his setup. I think he used the same oil cooler as the one above.
I think you might need new fittings and custom made brackets. I'm not sure though, I still have a single oem one which I'm planning on upgrading in the near future. Good luck.

 

If you just want to up grade the oil cooler, that one has the same thread as the factory one but you will also need a thermostat since the OEM oil coolers have them built in.

 

That will fit
I have a Mocal 25 row oil cooler however i have sleek headlights
I think mine would clear if i had pop ups. you can use mine for a reference

 

Yeah im derinately upgrading from my stocker. Im fixing to do a swap, and I dont want to put all the money into it to cheap out and keep the stock oil cooler. The engine im using doesnt "need" a oil cooler, im just doing it to help keep temps down during the summer on the rare occasion I take it to a track for some fun spirited driving.