Non Mazda source for hatch shocks
#1
Non Mazda source for hatch shocks
Replacement hatch shocks are now $200 or so for a pair so I was wondering if anyone has found a quality replacement source.
There are non OEM sets on eBay for $40 or so but I have had very bad experiences with the few eBay parts I have bought (and Dale has this negative report from a few years ago).
There are non OEM sets on eBay for $40 or so but I have had very bad experiences with the few eBay parts I have bought (and Dale has this negative report from a few years ago).
#4
8000...9000...*BUZZ*
iTrader: (1)
Join Date: Apr 2002
Location: Toronto
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
moconnor,
My car's in storage so I havn't seen the parts in person for some time, but it might be worth looking into the feasibility of using Tein hood dampers/FEED dampers/whatever other company makes them. You might be able 2 use them if they will fit. Whether or not they will lift the tail...well...maybe grab some hood shocks from a car with a heavier hood (honda civic or the like).
Good luck with your search, I'm curious to know what you come up with as mine are starting to sag.
My car's in storage so I havn't seen the parts in person for some time, but it might be worth looking into the feasibility of using Tein hood dampers/FEED dampers/whatever other company makes them. You might be able 2 use them if they will fit. Whether or not they will lift the tail...well...maybe grab some hood shocks from a car with a heavier hood (honda civic or the like).
Good luck with your search, I'm curious to know what you come up with as mine are starting to sag.
#5
Torqueless Wonder
iTrader: (1)
moconnor,
My car's in storage so I havn't seen the parts in person for some time, but it might be worth looking into the feasibility of using Tein hood dampers/FEED dampers/whatever other company makes them. You might be able 2 use them if they will fit. Whether or not they will lift the tail...well...maybe grab some hood shocks from a car with a heavier hood (honda civic or the like).
Good luck with your search, I'm curious to know what you come up with as mine are starting to sag.
My car's in storage so I havn't seen the parts in person for some time, but it might be worth looking into the feasibility of using Tein hood dampers/FEED dampers/whatever other company makes them. You might be able 2 use them if they will fit. Whether or not they will lift the tail...well...maybe grab some hood shocks from a car with a heavier hood (honda civic or the like).
Good luck with your search, I'm curious to know what you come up with as mine are starting to sag.
#7
Rotary Addict
iTrader: (2)
I gotta believe that if you go to Autozone or any other parts store and ask them if they have any for your car you would find some. I know these cars are rare, but that isn't a part that I think should be too hard to find. I don't know tho as I haven't needed to get them for my rx7 yet.
Trending Topics
#9
Or $40 for both Sachs with free shipping on Amazon.
Do you have first hand experience with these?
[Edit: these might be the eBay shocks. The Sachs parts numbers match on this ad for example, though it does say 'interchange':
http://cgi.ebay.com/ebaymotors/Hatch...t_2507wt_1165]
Also, partsgeek.com has them for $32 shipped for a pair. I will go ahead and order.
#15
RX-7 Bad Ass
iTrader: (55)
I will confirm from the original poster, I bought some off Ebay for a project car I had. They were CRAP, poor design, just terrible. I ended up throwing them out.
Dale
Dale
#17
sdrawkcab
iTrader: (1)
I know thats not what everyone wants to hear, but I got a set of stock 99 spoiler compatible rear deck struts at considerable cost.....
Dont regret it one bit! Good investment IMO
Every time I pop the hatch and it hovers just above the latch, and goes right up and holds with little effort , I smile with self satisfaction.
So if anyone is trying to get around purchasing a good set for the 99 spec wing, treat your self, the OEM units work so well!
Dont regret it one bit! Good investment IMO
Every time I pop the hatch and it hovers just above the latch, and goes right up and holds with little effort , I smile with self satisfaction.
So if anyone is trying to get around purchasing a good set for the 99 spec wing, treat your self, the OEM units work so well!
#18
All Motor
iTrader: (2)
Join Date: Mar 2003
Location: Redmond, WA
Posts: 1,604
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone actually tried the Sachs SG227005 and gotten them working?
http://www.amazon.com/Sachs-SG227005...8869912&sr=8-1
http://www.amazon.com/Sachs-SG227005...8869912&sr=8-1
#20
brap brap mf
iTrader: (14)
Join Date: May 2004
Location: clifton, NJ (north jersey)
Posts: 402
Received 0 Likes
on
0 Posts
Wait so, on my r1 with the r1 wing, when I pop the hatch, the hatch should fully open on its own? I've always had to pull it up maybe 6 inches or so and then it would fully open and stay open with no issues. Do I need new struts or is this somewhat normal operation for a hatch with an r1 wing?
#22
I just bought a pair from here 22 each. Hope they work .
http://www.autopartsbylou.com/lift-s...e=mmy&x=16&y=8
http://www.autopartsbylou.com/lift-s...e=mmy&x=16&y=8
#23
I just bought a pair from here 22 each. Hope they work .
http://www.autopartsbylou.com/lift-s...e=mmy&x=16&y=8
http://www.autopartsbylou.com/lift-s...e=mmy&x=16&y=8