No Secondary Boost????
#1
94 Single Turbo FD
Thread Starter
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
No Secondary Boost????
i am a relatively new owner of the Fd...my problem is i cant draw any boost from my secondary turbo.....
Sometimes it will kick in after if the primary turbo is boosting....but it wont kick in on its own if i am running the car in its range (4000+rpm)....when i take the car to that higher rpm and let off the throttle the turbo makes a whining noise.....what is wrong with my car.....please help?
Sometimes it will kick in after if the primary turbo is boosting....but it wont kick in on its own if i am running the car in its range (4000+rpm)....when i take the car to that higher rpm and let off the throttle the turbo makes a whining noise.....what is wrong with my car.....please help?
#3
I swear I didn't know.
iTrader: (2)
Join Date: Jul 2004
Location: Vic's Mom's House
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
On another note. I had that problem. Mine was my precat. That is the pipe that comes off of the turbos and down to the catalytic converter. You need to replace that with a 3" Down Pipe. When I did that all my boost problems were cured that instant.
My Primary would only boost around 3-4 PSI and no secondary anywhere to be found. Once this modification was completed she ran like a Cheetah running down an Antelope!
My Primary would only boost around 3-4 PSI and no secondary anywhere to be found. Once this modification was completed she ran like a Cheetah running down an Antelope!
#5
94 Single Turbo FD
Thread Starter
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
i have a 3" downpipe...yes a boost gauge i do need but i have been using my power fc to monitor the boost levels for now:
my mods include: downpipe,mid pipe, resinator pipe, racing beat cat back, apexi pfc w/commander, cold air intake, umm think that's it
my problem lies elsewhere i guess....my mechanic (who hasnt had time to look at the car yet) says its is probably a solenoid or a vaccuum hose
my mods include: downpipe,mid pipe, resinator pipe, racing beat cat back, apexi pfc w/commander, cold air intake, umm think that's it
my problem lies elsewhere i guess....my mechanic (who hasnt had time to look at the car yet) says its is probably a solenoid or a vaccuum hose
#7
94 Single Turbo FD
Thread Starter
Join Date: May 2006
Location: Calgary, Alberta, Canada
Posts: 1,418
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mahjik
lol, since that's about all that makes up the sequential control system (solenoids and vacuum lines), he's got a good start.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM