3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

nickle in rotor housing

Thread Tools
 
Search this Thread
 
Old 11-16-07, 05:46 PM
  #1  
Senior Member

Thread Starter
iTrader: (6)
 
streetdreamzny's Avatar
 
Join Date: Aug 2001
Location: P.C., NY
Posts: 531
Received 0 Likes on 0 Posts
Unhappy nickle in rotor housing

today i started pulling my motor apart to do a rebuild and got a big suprise when i took off the lower intake manifold. last rebuild i needed rotor housing and was told by the shop doing the rebuild to buy 2nd gen rotor housings because the are the same except cheaper, with the only differance being a hole in the housing for coolant that the 3rd gen doesnt have. i figured this was no problem they would weld the hole or something instead they used a nickle(5 cents) and some epoxy to fill the hole. i have had a small coolant leak for some time coming from the lower intake manifold and now i know why. here a some pics from my cell phone so they aren't good but sunday i will take some good pics with my digital camera.
Attached Thumbnails nickle in rotor housing-nov16_0001.jpg   nickle in rotor housing-nov16_0002.jpg  
Old 11-16-07, 05:51 PM
  #2  
FEED me

iTrader: (26)
 
TRISPEEDFD3S's Avatar
 
Join Date: Jan 2004
Location: Bay Area, CA
Posts: 2,787
Likes: 0
Received 0 Likes on 0 Posts
Wow....That's some fucked up ****...
Old 11-16-07, 05:53 PM
  #3  
Back door, no babies...


iTrader: (14)
 
Davin's Avatar
 
Join Date: Sep 2006
Location: LA, DC & Philly
Posts: 1,411
Received 3 Likes on 3 Posts
sounds like we should round up a lynch mob!
Old 11-16-07, 05:58 PM
  #4  
mmm doritos

iTrader: (4)
 
13bturbofc's Avatar
 
Join Date: Apr 2006
Location: lancaster PA
Posts: 2,107
Likes: 0
Received 0 Likes on 0 Posts
OMG you have to be kidding me! a nickel hahahahaha
Old 11-16-07, 06:05 PM
  #5  
Huh?

 
crcleofdst's Avatar
 
Join Date: Jul 2004
Location: Baltimore, Maryland
Posts: 670
Likes: 0
Received 0 Likes on 0 Posts
J/C on a crutch......





Who the hell is the builder responsible for this?
Old 11-16-07, 06:09 PM
  #6  
Sponsor
iTrader: (41)
 
IRPerformance's Avatar
 
Join Date: Apr 2003
Location: NJ
Posts: 11,347
Received 317 Likes on 190 Posts
Looks like the builder cheeped out and used 2nd gen housings, which have a extra coolant passage. Instead of sealing it up with a freeze plug, they used the nickel. Often they fail and leak so I would never go that route.
Old 11-16-07, 06:24 PM
  #7  
Sponsor
iTrader: (41)
 
IRPerformance's Avatar
 
Join Date: Apr 2003
Location: NJ
Posts: 11,347
Received 317 Likes on 190 Posts
Question

Originally Posted by crcleofdst


Who the hell is the builder responsible for this?
+1
Old 11-16-07, 06:26 PM
  #8  
Dr. Brule

iTrader: (2)
 
theRJpackage's Avatar
 
Join Date: Sep 2007
Location: Michigan
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
I guess you know to not go back to that shop anymore
Old 11-16-07, 06:31 PM
  #9  
Back door, no babies...


iTrader: (14)
 
Davin's Avatar
 
Join Date: Sep 2006
Location: LA, DC & Philly
Posts: 1,411
Received 3 Likes on 3 Posts
dude, i would seriously go there and kick his ***!
Old 11-16-07, 06:48 PM
  #10  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,529
Received 539 Likes on 326 Posts
Wow.

Last edited by GoodfellaFD3S; 06-09-11 at 07:16 PM.
Old 11-16-07, 07:07 PM
  #11  
silver ghost

iTrader: (11)
 
G's 3rd Gen's Avatar
 
Join Date: Sep 2003
Location: Home of the Rolex 24
Posts: 3,061
Likes: 0
Received 5 Likes on 5 Posts
Quit bitching. At least you got a nickel toward your next build! HEHE. That is fucd up. G
Old 11-16-07, 07:33 PM
  #12  
Senior Member

Thread Starter
iTrader: (6)
 
streetdreamzny's Avatar
 
Join Date: Aug 2001
Location: P.C., NY
Posts: 531
Received 0 Likes on 0 Posts
i don't want to out right say the name but its located in queens ny, and specializes in rx7s . heres a hint has racing in its name oh and i would definetly never go back
Old 11-16-07, 07:51 PM
  #13  
.

 
rx7goomba's Avatar
 
Join Date: Jun 2006
Location: Ky
Posts: 988
Likes: 0
Received 1 Like on 1 Post
Originally Posted by streetdreamzny
i don't want to out right say the name but its located in queens ny, and specializes in rx7s . heres a hint has racing in its name oh and i would definetly never go back
Well....that pretty much is useless info. The shop that did this should stand behind their work.
Old 11-16-07, 07:56 PM
  #14  
rotor rotor pow.

iTrader: (1)
 
sevensix's Avatar
 
Join Date: Mar 2005
Location: Southern CA
Posts: 3,170
Received 1 Like on 1 Post
ya can u give me the name i like the look of that nickel and i'd like the same done to my housings. pls give the shop so i can contact them yay
Old 11-16-07, 08:13 PM
  #15  
Full Member

 
Mybaby's Avatar
 
Join Date: Dec 2003
Location: Great Neck, NY
Posts: 225
Likes: 0
Received 0 Likes on 0 Posts
Got a story along those lines but found a small nut lodged btwn the rotor and the housing. Both were junk. This rebuild was done, I guess, by his neighbor a few years back. He was located in Elmont, NY. I personally hope that he has never worked on any else car after the situation I went thru.
Old 11-16-07, 08:32 PM
  #16  
Huh?

 
crcleofdst's Avatar
 
Join Date: Jul 2004
Location: Baltimore, Maryland
Posts: 670
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by streetdreamzny
i don't want to out right say the name but its located in queens ny, and specializes in rx7s.
Dude, this was not an oversight. It was intentional. You walked into this place, handed over hard earned money expecting a quality rebuild, and they gave you this crap. I mean, someone seriously thought that it was ok to use a nickel in your engine!!!!!!

This kind of thing needs to be public information so that others don't end up in the same boat as you. Please do us all a favor and post up the name of the shop.


Oh, and good luck with the rebuild.
Old 11-16-07, 08:34 PM
  #17  
Vp in charge of Girls

iTrader: (3)
 
re-rx7's Avatar
 
Join Date: Jun 2006
Location: Nashville, TN
Posts: 1,550
Received 4 Likes on 3 Posts
i agree that you need to to inform the forum of the shop.
Old 11-16-07, 09:20 PM
  #18  
Senior Member

iTrader: (2)
 
TheCrazyAZN's Avatar
 
Join Date: Jun 2002
Location: Dallas, Tx
Posts: 707
Likes: 0
Received 2 Likes on 2 Posts
Old 11-16-07, 09:33 PM
  #19  
Eh

iTrader: (56)
 
djseven's Avatar
 
Join Date: Aug 2002
Location: Nashville, TN
Posts: 6,544
Received 333 Likes on 189 Posts
On a side note I have a good rebuild for sale if you are interested. No nickels in this rebuild
Old 11-16-07, 09:46 PM
  #20  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
Originally Posted by streetdreamzny
i don't want to out right say the name but its located in queens ny, and specializes in rx7s . heres a hint has racing in its name oh and i would definetly never go back
This place http://www.rx7s.com/ ?
Old 11-16-07, 10:04 PM
  #21  
Senior Member

Thread Starter
iTrader: (6)
 
streetdreamzny's Avatar
 
Join Date: Aug 2001
Location: P.C., NY
Posts: 531
Received 0 Likes on 0 Posts
Mahjik
Old 11-17-07, 09:40 AM
  #22  
All Spooled Up

iTrader: (7)
 
badddrx7's Avatar
 
Join Date: Nov 2001
Location: Ironton,ohio
Posts: 2,752
Likes: 0
Received 3 Likes on 3 Posts
You've got to be shitting me......again.
Attached Thumbnails nickle in rotor housing-wtf-.jpg  
Old 11-17-07, 09:50 AM
  #23  
Senior Member

 
siris's Avatar
 
Join Date: Jun 2007
Location: Lafayette, IN
Posts: 261
Received 1 Like on 1 Post
I'd take the 5 cents and go give them your 2 cents worth...
Old 11-17-07, 12:43 PM
  #24  
NizzleMania Productions

iTrader: (5)
 
MrNizzles's Avatar
 
Join Date: Jun 2007
Location: California
Posts: 686
Likes: 0
Received 1 Like on 1 Post
Originally Posted by crcleofdst
Dude, this was not an oversight. It was intentional.
I COMPLETELY AGREE! The shop sealed the hole with a nickel on purpose, so it would leak and cause problems so you would bring the car back in and they make MONEY! ... so Tony can keep racing his super p1mp3d out RX7 (thanks mahjik, as always a fountain of info)

I would buy the DVD that has the video of you walking back in there with the nickel in one hand and a big in the other

But seriously, if I actually paid $$$ for that, I would be filing some kind of claim... my time making that hard earned $$$ is f'in worth it!
Old 11-17-07, 12:44 PM
  #25  
Senior Member

iTrader: (2)
 
TheCrazyAZN's Avatar
 
Join Date: Jun 2002
Location: Dallas, Tx
Posts: 707
Likes: 0
Received 2 Likes on 2 Posts
Where are the HQ pictures???

I wanna save those images into my HD for future reference when I decide to build my motor... I always forget and use dimes that blow out at WOT.


Quick Reply: nickle in rotor housing



All times are GMT -5. The time now is 03:36 PM.