3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

newbee with serious problem!!!!

Thread Tools
 
Search this Thread
 
Old Sep 27, 2005 | 08:41 PM
  #1  
nzalich's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 9
Likes: 0
From: PA
Angry newbee with serious problem!!!!

I just had my motor replaced about 3k ago and was still taking it easy on it and all of a sudden, the thing started running like ****. It starts cutting out around 3200 rpm, and there is a hollow rapping noised by my exhaust manifold. The motor is monster ported with a single turbo and all that happy stuff if that helps out with any suggestions as to wtf is going on. I'm ready to throw my helmet on and strap in, then take a big old oak tree out on a date in it, that is how pissed I am. Help!!!!!!!!!!!!!!
Reply
Old Sep 27, 2005 | 08:59 PM
  #2  
KungFuMonkey's Avatar
Good bye RX-7
 
Joined: Apr 2002
Posts: 220
Likes: 0
From: Cary, NC
The best is to take it back.
Reply
Old Sep 27, 2005 | 11:07 PM
  #3  
Sickass7's Avatar
Rotors, turbos, and brass
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 723
Likes: 0
From: Pittsburg, KS
Originally Posted by KungFuMonkey
The best is to take it back.
Agreed, sounds like your rear rotor may be FUBAR'd. Take it back and make them rebuild it, if they don't agree to, shove it up their ***.
Reply
Old Sep 27, 2005 | 11:51 PM
  #4  
jpandes's Avatar
Rotary Freak
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 2,236
Likes: 1
From: San Francisco, CA
Good luck man.
Reply
Old Sep 28, 2005 | 12:16 AM
  #5  
Cgotto6's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,999
Likes: 60
From: Maltby, Washington
Originally Posted by KungFuMonkey
The best is to take it back.
Take it back where? He never said it was done by a shop or anything. For all we know he could have rebuilt the motor and installed it himself.
Reply
Old Sep 28, 2005 | 01:25 AM
  #6  
KungFuMonkey's Avatar
Good bye RX-7
 
Joined: Apr 2002
Posts: 220
Likes: 0
From: Cary, NC
I hope a newbee as he called himself did not try to rebuild a rotary...
Reply
Old Sep 28, 2005 | 07:45 AM
  #7  
BlueTII's Avatar
Banzai Racing
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,632
Likes: 3
From: Indiana
He does say that he "had the motor replaced" that indicates that someone else did the work. First thing you need to do is a compression test. That will tell you if it is the engine, then if that turns out ok it is either in your tuning or other hardware.
I am guessing that you have a PFC or some other engine management. What turbo are you running, with which fuel system? What do you consider "taking it easy"?
Reply
Old Oct 3, 2005 | 07:33 PM
  #8  
nzalich's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 9
Likes: 0
From: PA
I had the motor replaced at the rx7 store. I have the pfc with the ultimate fuel system from them. I spoke with Xavier, one of the guys at the store and he said it sound like a leak in my intercooler piping? I checked all that and even changed the plugs since they set the car to run rich since it was a new motor. I didn't boost for the first 1000 miles then didn't go above 5lbs. after 2000miles. I am going to try to make it up to see them this weekend and go from there. If the car makes it.
Reply
Old Oct 3, 2005 | 08:15 PM
  #9  
Cgotto6's Avatar
Rotary Freak
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,999
Likes: 60
From: Maltby, Washington
Im sure when you get it to them they will have it fixed in no time. I havent heard of people having problems with their shop ever.
Reply
Old Oct 3, 2005 | 09:39 PM
  #10  
adam c's Avatar
Cheap Bastard
iTrader: (2)
 
Joined: Sep 2002
Posts: 8,368
Likes: 50
From: San Luis Obispo, Ca
Must be real new to the forum ...can't even spell "newbie" j/k.

Good luck getting it fixed. They should get you taken care of.
Reply
Old Oct 3, 2005 | 10:29 PM
  #11  
Sickass7's Avatar
Rotors, turbos, and brass
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 723
Likes: 0
From: Pittsburg, KS
rx7store is a reputable shop, they should get you hooked up, real good guys.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 10:38 AM.