new problem with fd and idle
could be a manifold leak. you can spray carb cleaner around the l.i.m. and if the car stalls while spraying you've found your leak. do a search on leaks and your problem will probably come up in one of the threads
Originally posted by smokey-fd
can the lim be removed without taking turbos out
can the lim be removed without taking turbos out
You have to pull the turbo to get at the LIM studs.
Sorry.
BTW, have you checked for engine codes? Have you checked your cruise control and throttle cables for binding?
-b
Trending Topics
Check your ISC on the TB.
I've left that unplugged before and had the high idle problems (and them immediately remembered that I didn't plug in the connection).
Here's a little thread with some troubleshooting ideas:
https://www.rx7club.com/showthread.p...hreadid=294800
I've left that unplugged before and had the high idle problems (and them immediately remembered that I didn't plug in the connection).
Here's a little thread with some troubleshooting ideas:
https://www.rx7club.com/showthread.p...hreadid=294800
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM



