Yes, i searched in the wiring diagram and in older posts, but i can't find the answer.

1- black/blue (B/L)
2- black/green... maybe dark green (B/G or B/DG)

both wires missing connectors. its a JDM harness.
I got PFC and I plan to go single turbo.

I'm a little bit lost, but I think its the air pump and coolant level sw.
Its the only things that I need to know before completing my harness rewrap. thanks.

 

nobody ?

 

picture showing connector/wire and approx. location on the wiring harness also helps

 

not really helping that your harness is jdm either, apparently they are similar to the us harness, but are definitely way different for some connections. you definitely need to post some pictures as oyvindjs said as well.

 

+1

Post a picture, i have an JDM wiring harness too and have searched a lot in the past!

 

I took some picutres to clarify the situation.



Theres all the connectors I removed actually.



Its seem there no coolant level disconnect and coolant level sw in a jdm harness... Not enought plugs maybe theres in alternator harness ? I check quickly and cant find those plugs

 

I need this thing done for the week-end !

 

Haha I'm in the same boat. Those wires don't connect to the ecu plugs, right? Cause that's the deal with mine. I hope someone solves our problem or else I'm just going to yank them since they were never hooked up when I bought the car

 

yeah, theses wires are pinned into the blue plug !

 

Yeah that's exactly what I've been trying to find out myself. I hope someone can tell us

 

bump, I did more search with no result

 

both sould terminate on plug B1-07 Magnetic Clutch Air pump

B/G - (+)
B/L - (-)

See wiring diagram B-1a

Not needed if running PFC

 

Rozado to the rescue!!! Thanks now i feel secure pulling those wires out now. Time to wrap it all back up now

 

thanks 1000x rozado, Now, I only need to know where is the connector for the coolant filler neck level sensor, the one in front. I saw in my old pictures thats is a white connector, but i cant find it. wtf ? wire color ? i guest its black

 

I found that the coolant level sensor wire is brown into de emission harness and it turn brown/white when its plugged into the engine harness (small black clip beside AC white clip). But my problem is : I see no cutted wire, extra wire or parts to connect to that... Can I just replace both connector and re-wire ? it will work fine ?

 

Rozado is correct they are for the Air Pump Clutch
The B/G is B+ and from the X-05 connector
The B/L is the Neg from the X-05 connector and Air Pump Relay