Need help with Greddy EGT gauge install.
#1
Need help with Greddy EGT gauge install.
I am having some problem installing Greddy EGT..
I bought it used and some of the wires are cut.
So far this is what I have.
Red - 12V constant
Orange - 12V ignition
Black - Ground
Green - light/ lamp on
And I have Yellow ???
And I have two wires from the probe. One white base with red stripes and other with white base with blue stripes.
Can someone tell me how it hooks up??
Thank you!
PHIL
I bought it used and some of the wires are cut.
So far this is what I have.
Red - 12V constant
Orange - 12V ignition
Black - Ground
Green - light/ lamp on
And I have Yellow ???
And I have two wires from the probe. One white base with red stripes and other with white base with blue stripes.
Can someone tell me how it hooks up??
Thank you!
PHIL
#2
canadian monster
iTrader: (2)
Join Date: Mar 2001
Location: Trois-Rivières, Qc, Can
Posts: 2,083
Likes: 0
Received 0 Likes
on
0 Posts
well i can't seem to find the instructions anymore but one thing is for sure, i didn't cut any wires...
mostly those going to the probe, did he cut the stainless heat shield?
mostly those going to the probe, did he cut the stainless heat shield?
#4
Puma,
Thank you.. I finally find out why I couldn't hook the damn thing to my car.. I was missing the electronic sending unit.
I have contacted the seller and he's going to send me a new unit or refund me..
Really cool guy at Phase 2 Motortrend.
I highly recommend him.
Thanks for your help puma!
PHIL
Thank you.. I finally find out why I couldn't hook the damn thing to my car.. I was missing the electronic sending unit.
I have contacted the seller and he's going to send me a new unit or refund me..
Really cool guy at Phase 2 Motortrend.
I highly recommend him.
Thanks for your help puma!
PHIL
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM