BobfisH

All,

Have started to fit my sleek headlights today, i have a couple of questions. Yes, before you ask - they did come from Ebay.

First off, i have been given some brackets to mount the actual lamps to the light housing. 8 of each type:

Type 1:


Type 2:


These brackets fit on the lights in a variety of ways, the only way i can possibly see of getting these to mount is like below - but obviously, this is not ideal...

Its hard to see what ive done here, but basically - the bottoms of the "type 1" bracket screw into the bottom of the light housing no problem - but the tops of these brackets are way forward and have nothing to screw to, so ive mounted a type 2 bracket on there and this is able to screw to the hood of the light assembly.





Also, what do i need to cut out from here? Whats safe to cut and how far back? as it looks pretty structural...







If anyone has fitted these lights (or similar) if you could shed some light that would be great. If nobody has any ideas, i guess ill just go out and get some aluminium and custom make some brackets.....

Thanks guys.

BobfisH

BUMP!

If you dont know the answers to my questions, i'd appreciate pics of other sleek headlighted cars so i can see how much has been cut out...

Narfle

iTrader: (16)

im pretty sure you have to cut up that bar behind the headlight. let me do some search for you.

Narfle

iTrader: (16)

https://www.rx7club.com/showthread.p...klight+install

BobfisH

wow thanks dude, i think im just going to make my own versions of the brackets of the rotary extreme kit. Should sort it!

I'll make a new thread of my progress with it tomorrow!

MYBADD

i nearly brought the same lights, but ended up getting the twin halos instead, not as sleek as the ones you purchased, but definitely easier to install...

please keep me imformed on how it turns out...

BobfisH

see https://www.rx7club.com/3rd-gen-archives-73/work-begins-new-engine-lights-wheels-pics-506967/