Been working on my car for the past 12 hours and am at a stand still and no matter how much I go between the simplification diagram and the stock I can't figure out where these two hoses go.

#1 just goes into no where, on the stock setup it goes to the vacuum chamber but I have mine located like in the simplified diagram and connected to the LIM.

#2 On both diagrams just terminates right there and I can't remember where I pulled it from.

 

#1 is supposed to go to pressure chamber, #2 to oil pedistal.

 

I don't see how #2 goes to the oil pedistal. Both connections are already used on it, and I didn't pull any hose out that is long enough to connect the turbo inlet to the oil pedistal.

 

That hose goes from turbo inlet to a medal tube about 5 in. above it and to the right. Other end of medal tube connects to the hose that goes to oil pedistal.

 

I found it, thanks!

 

What's up with the pressure chamber line? Where it connects to the LIM isn't a pressure source. It just goes through the LIM and I don't see anything connected to the other side.

 

I ran the #1 connection to the other side of the LIM, haven't tested the theory to see if it would actually work yet or not.