3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Need Advice!!

Thread Tools
 
Search this Thread
 
Old 02-27-06, 11:44 AM
  #1  
Full Member

Thread Starter
 
coolrotaries's Avatar
 
Join Date: Oct 2001
Location: New York
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
Need Advice!!

Hey everyone,

My car has been sitting in my garage for 2 yrs now and I am looking for some advice as for bringing it back into service. I know I should change the following oil, oil filter, gas. Any onther areas I should look into before cranking up this sleeping beauty? Any advice would be great!! I'm in the procecess in putting in my new turbo AF61!!! Can't wait. I read some great reviews on this turbo.

Thanks
Diego
Old 02-27-06, 02:27 PM
  #2  
Mostly stock

iTrader: (5)
 
Mr3plus1's Avatar
 
Join Date: Dec 2005
Location: Houston
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
Flush the coolant. Check for cracked or really old vaccuum lines/coolant hoses. Thats about it. Crank it over and see if she fires up.
Old 02-27-06, 02:38 PM
  #3  
Full Member

Thread Starter
 
coolrotaries's Avatar
 
Join Date: Oct 2001
Location: New York
Posts: 217
Likes: 0
Received 0 Likes on 0 Posts
Thanks MR3 I'm actually running Evans Cooling, so with that I should be ok
Old 02-27-06, 04:36 PM
  #4  
In the burnout box...

iTrader: (32)
 
mono4lamar's Avatar
 
Join Date: Oct 2003
Location: New York
Posts: 4,453
Likes: 0
Received 1 Like on 1 Post
i wouldnt just fire her up... pull the ignition relay and the fuel pump relay. turn the car over and let the oil get primed and moved around a lil bit. but yeah change the oil new/filter. and look if an animal got into your stock box if you still have one... sometimes they leave presents to get sucked in! look at the plug wires see if they are cracked, if so replace. while your in the area if you have the money get some new plugs in there they can never hurt!
Old 02-27-06, 05:50 PM
  #5  
Sponsor
iTrader: (41)
 
IRPerformance's Avatar
 
Join Date: Apr 2003
Location: NJ
Posts: 11,347
Received 317 Likes on 190 Posts
Change ALL fluids. Oil and coolant are obvious, but I would also change the gear oil and rear end. Brake fluid absorbs moisture so I would flush the whole system as well. Drain the gas tank and put it fresh gas. make sure you dispose of it properly. I couldn't even get my lawn mower to burn gas that was a couple years old. You might also want to squirt a little oil into the spark plug holes to help lubricate things as the motor has been sitting so long. charge the battery, pull the egi fuse and crank 3 times 10 seconds at a time. Then put in the fuse and start it. if you need help I am in North NJ.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
08-06-17 01:41 PM
eddierotary
Engine Management Forum
16
10-04-16 08:22 PM
Zinraf
2nd Generation Specific (1986-1992)
3
10-01-15 01:09 PM
izzolaw
1st Gen General Discussion
2
09-27-15 08:33 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM



Quick Reply: Need Advice!!



All times are GMT -5. The time now is 01:46 PM.