3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Moisture from exhaust?

Thread Tools
 
Search this Thread
 
Old Jul 22, 2004 | 09:44 PM
  #1  
ManGaZeRo's Avatar
Thread Starter
Living the Dream
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
Moisture from exhaust?

I just changed my oil... and holy crap was the oil black..we had to go through 2 bottles just to run through it and clean it. After all that business I put in some castrol gtx 10w30. After I fired it up, I felt moisture coming from the exhaust only a little bit of smoke came out though. My idle up to 1k which was kind of awkward.. But anyone want to explain what is up with the mositure coming out?
Reply
Old Jul 22, 2004 | 09:55 PM
  #2  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,724
From: Pensacola, FL
May just be good ol' condensation. I wouldn't particuarly worry about it unless you're mysteriously losing coolant.

You said you ran through 2 bottles to clean it - I'm assuming that means you changed the oil, started the car up, shut it down, and changed it again, right? If so, you probably had a minor flood condition making the car run rough on startup.

Dale
Reply
Old Jul 22, 2004 | 10:19 PM
  #3  
ManGaZeRo's Avatar
Thread Starter
Living the Dream
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
Alright i'll be sure to check my coolant thanks!
Reply
Old Jul 23, 2004 | 02:11 AM
  #4  
SpeedKing's Avatar
Power Trippin'
Tenured Member: 20 Years
iTrader: (4)
 
Joined: Nov 2003
Posts: 3,128
Likes: 1
From: Land of The Quick
Originally Posted by ManGaZeRo

I just changed my oil... and holy crap was the oil black..we had to go through 2 bottles just to run through it and clean it. After all that business I put in some castrol gtx 10w30.
The oil will look black fairly quickly because of the old oil in the oil cooler(s) being mixed in with the new since it isn't drained during an oil change.

As for the mooisture coming out of the exhaust, as mentioned above, it's most likely condensation and is normal.
Reply
Old Jul 23, 2004 | 10:44 AM
  #5  
MR_Rick's Avatar
Planning my come back
Tenured Member 20 Years
iTrader: (7)
 
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Austin, Tx
yes I get moisture almost every morning. more than likely is you problem too.
Reply
Old Jul 23, 2004 | 04:25 PM
  #6  
ManGaZeRo's Avatar
Thread Starter
Living the Dream
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
Just changed my air filter today too, and at start up the rpm shot up to 3k and stayed there for maybe a good 10 secs.. When I started it up I forgot to put on the cover air ram for intercooler and intake, but I don't if that explains why the idle shot up so high.
Reply
Old Jul 23, 2004 | 04:39 PM
  #7  
Fatman0203's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 05 Years
 
Joined: May 2003
Posts: 3,639
Likes: 0
From: MIA
Originally Posted by ManGaZeRo
Just changed my air filter today too, and at start up the rpm shot up to 3k and stayed there for maybe a good 10 secs.. When I started it up I forgot to put on the cover air ram for intercooler and intake, but I don't if that explains why the idle shot up so high.
Auto Matic warm up system. Start car in gear or blip the gas real quick.
Reply
Old Jul 23, 2004 | 04:53 PM
  #8  
rotoryspeeddreamz's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 184
Likes: 0
From: Bay Area
Originally Posted by ManGaZeRo
Just changed my air filter today too, and at start up the rpm shot up to 3k and stayed there for maybe a good 10 secs.. When I started it up I forgot to put on the cover air ram for intercooler and intake, but I don't if that explains why the idle shot up so high.
That's just the AWS (accelerated warm up system) doing it's job. It's basically just to warm up the catalytic converters to operating temp faster.
Reply
Old Jul 23, 2004 | 05:02 PM
  #9  
ManGaZeRo's Avatar
Thread Starter
Living the Dream
Tenured Member 15 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 1,342
Likes: 0
From: Temple city, CA
Oh, I thought they only had those in the fc.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ian_D
New Member RX-7 Technical
6
Sep 6, 2015 10:38 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM
FührerTüner
General Rotary Tech Support
3
Sep 4, 2015 01:41 PM




All times are GMT -5. The time now is 03:58 PM.