Mock-Up Twin Scroll Manifold
Trending Topics
#15
Wide7
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: Scottsdale
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
What kind of boost are u running and with what kinds of output? i am interested in seeing whats gonna happen with my car. Also looked at the 500R turbo by A-Spec, it was late tho and i dont remember if it is a divided housing or not. Is there much difference between these two turbos?
#17
Talk to me....
iTrader: (2)
What do you think about the placement? I don't think a spec reveals the specs of their 500r. The gt35r they sell however is no different than one you can get anywhere else with the exception of the 1.06 t4 turbine housing that no one else seems to be able to get. They have a ton of feedback in the forum.
Last edited by Uncle Hungry; 07-16-08 at 03:27 PM.
#18
Wide7
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: Scottsdale
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
What do you think about the placement? I don't think a spec reveals the specs of their 500r. The gt35r they sell however is no different than one you can get anywhere else with the exception of the 1.06 t4 turbine housing that no one else seems to be able to get. They have a ton of feedback in the forum.
What feedback are you talking about, just the reg. gt35R? that wont really help too much, know what i mean? the divided housing is supposed to make all the difference, and the larger hotside is supposed to not overwhelm the cooling system like smaller ball bearing turbines do, so i have been told..
#20
Wide7
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: Scottsdale
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
sucks, the shop is at says i have to have it towed to my house cause they dont want to push it in and out every day for a month while Full Race makes the production manifold...
#21
Wide7
Thread Starter
iTrader: (2)
Join Date: May 2005
Location: Scottsdale
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Well here's the Update..
Manifold is done, Turbo and wastegates are in hand, now just waiting for the shop to rotate me back in to fab the downpipe, hotside intercooler pipe, dump tubes, and tune. Hopefully not too much longer!
Here's the pics = )
And to keep with the tradtion..
Turbo- gt35R with T4 housing and 1.06AR
Manifold is done, Turbo and wastegates are in hand, now just waiting for the shop to rotate me back in to fab the downpipe, hotside intercooler pipe, dump tubes, and tune. Hopefully not too much longer!
Here's the pics = )
And to keep with the tradtion..
Turbo- gt35R with T4 housing and 1.06AR
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Group Buy & Product Dev. FD RX-7
7
03-21-18 11:19 AM