what or where is the vaccuum line suppose to go? and is that connector supposed to have something on it? these are located right under the vaccuum chamber box..any help will be greatly appreciated.. thanks!

and i take it this is a breather of sorts but just wanted to check to see if this was correct.

 

what pics?

 

i see them doesn't anyone else?

 

On the manual cars it is an empty pipe, you cant really see the other end but it doesnt have anything connected to it either.

The 'breather' you have is a air filter for one of the solenoids, the ones that have air filters are:

Fuel pressure regulator control (For hot starts)
Relief 1
Switching solenoid
EGR
Turbo Control
Double Throttle Control

These are all located IN the rack under the UIM.

Hope this helps,
~Kris

 

Nothing connects to it. It's an empty pipe.
The blue electrical connector isn't used either.
Maybe it's used on California cars or automatics, but it doesn't go anywhere on mine.

 

cool.. so theres nothing wrong then... good. i am boosting 9.5 or so and then dropping to 7-8 and back to 9.... it very well could be the gauge reading a little wrong or i have a little leak..... i'm installing a power fc and doing the poor mans non this weekend ....well see if i can boost a little more. thanks

 

don't go non seq if you seq is working...which it sounds like it is.

 

that one pipe that don't have a hose is connected to the right pipe where the wastegate and turbo precontrol solenoid are attached.