milled injector pics
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: West Palm Beach, FL
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
milled injector pics
I thought I should take a picture of the primary injector rail after it got milled down 1/8 of an inch before i put everything together since i saw some people wanting to see it.
#3
Senior Member
Thread Starter
Join Date: Apr 2004
Location: West Palm Beach, FL
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
I paid $30 from a local machine shop turn around time is 2 days. There was another one that only charges $20 bucks but his turn around time was 10 days.
Trending Topics
#8
Banned. I got OWNED!!!
Join Date: Jul 2004
Location: next to the polishing wheel!!!
Posts: 1,179
Likes: 0
Received 1 Like
on
1 Post
For five dollars I was milling the part , sand blasting and cleaning it and giving SS sockethead screws . If you do it for $ 0.00 ,then you give a better deal then I will ,So I will quit doing them .
Thread
Thread Starter
Forum
Replies
Last Post
Wicked93gs
Other Engine Conversions - non V-8
44
01-12-22 10:08 AM