3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Max HP on stock engine w/ aftermarket add ons

Thread Tools
 
Search this Thread
 
Old Mar 22, 2012 | 12:00 PM
  #1  
edgars95rx7's Avatar
Thread Starter
Senior Member
Tenured Member: 10 Years
iTrader: (5)
 
Joined: Dec 2011
Posts: 312
Likes: 0
From: iowa city
Max HP on stock engine w/ aftermarket add ons

i have stock engine, stock twins, pf intercooler, catback exhaust and ecu how much could i make the ecu also has low med and high boost.
Reply
Old Mar 22, 2012 | 12:13 PM
  #2  
limepro's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (2)
 
Joined: Apr 2007
Posts: 805
Likes: 0
From: Miami, FL
which ecu? if aftrrmarket the stock fuel system is good to about 14 psi. that would get you around 300whp but might want to upgrade cooling also, at the very least ic and radiator. the twins aren't good for much more than that.
Reply
Old Mar 22, 2012 | 12:14 PM
  #3  
limepro's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (2)
 
Joined: Apr 2007
Posts: 805
Likes: 0
From: Miami, FL
see you have upgraded ic already, missed that. still stands about the same though, you can push the twins a little higher but not recommended.
Reply
Old Mar 22, 2012 | 05:59 PM
  #4  
96fd3s's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Apr 2008
Posts: 1,092
Likes: 5
From: NZ
here you go, not typical but it can be done.
10.8 sec quarter mile on stock twins.
411hp @ 18psi

https://www.rx7club.com/time-slips-dyno-121/10-87-%40-128-90-mph-stock-twin-turbos-21-psi-953139/
Reply
Old Mar 22, 2012 | 06:42 PM
  #5  
93rx74lyfe's Avatar
Ronald..
Tenured Member 15 Years
iTrader: (1)
 
Joined: Aug 2005
Posts: 2,013
Likes: 1
From: Fairfax/Manassas VA
If it's the pfs ecu, trash it.
Reply
Old Mar 22, 2012 | 07:31 PM
  #6  
limepro's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (2)
 
Joined: Apr 2007
Posts: 805
Likes: 0
From: Miami, FL
Originally Posted by 96fd3s
here you go, not typical but it can be done.
10.8 sec quarter mile on stock twins.
411hp @ 18psi

https://www.rx7club.com/showthread.php?t=953139
While yes on the stock turbos nearly everything else was upgraded. The OP is on stock internals, stock port, stock injectors, etc. I wish it were that simple but it isn't, above 14psi your injectors have trouble keeping up, if you run out of fuel, boom!
Reply
Old Mar 22, 2012 | 08:49 PM
  #7  
prrex4ever's Avatar
Now What?
Tenured Member 10 Years
iTrader: (3)
 
Joined: Oct 2004
Posts: 2,394
Likes: 0
From: Texas
I have just about the same setup and I'm pushing about 307 to the wheels at 13 psi. I'm at about 90 % injector duty at WOT, time for upgraded fuel system.
Reply
Old Mar 23, 2012 | 08:13 AM
  #8  
XLR8's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (52)
 
Joined: Oct 2001
Posts: 3,902
Likes: 10
From: NJ
A little reseach will tell you around 300whp. The stock fuel system isn't adequate for much more, no matter what turbo's, exhaust or ECU you have.

You should try searching before posting please.....
Reply
Old Mar 26, 2012 | 09:04 PM
  #9  
edgars95rx7's Avatar
Thread Starter
Senior Member
Tenured Member: 10 Years
iTrader: (5)
 
Joined: Dec 2011
Posts: 312
Likes: 0
From: iowa city
yes its the PF ecu. it also has a bigger radiator idk which but its prob PF since every thing else is PF.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM
Snook
3rd Generation Specific (1993-2002)
12
Aug 15, 2015 08:18 AM




All times are GMT -5. The time now is 03:03 AM.