Mad Mikes Mad Bull 4-Rotor FD - The intro
#51
watashi no shichi
iTrader: (4)
^ You serious?
He cut the front and rear off of the car to fabricate/install a tube frame. Guess he did a good job because you couldnt tell.
The "*****" shifter is like that for leverage. It is not for looks. Did you read the thread?
For the steering obviously he did something to be able to make the car turn back around after spinning almost 180 degrees.
He has done almost all of the work himself in his shop. Yea, he is a moron
John
He cut the front and rear off of the car to fabricate/install a tube frame. Guess he did a good job because you couldnt tell.
The "*****" shifter is like that for leverage. It is not for looks. Did you read the thread?
For the steering obviously he did something to be able to make the car turn back around after spinning almost 180 degrees.
He has done almost all of the work himself in his shop. Yea, he is a moron
John
#52
Rotary Freak
iTrader: (5)
IC there's some hate on drifting LOL .. drifting is entertainment , but its just as much about car control .. being able to make the car fo what you want in OH **** moments is a huge deal in motorsports.. if you are racing .. and mistakes WILL HAPPEN .. if you know what to do when the car goes out on you it will save you from spinning .. and losing more than just a second on that one lap ..
car control is a huge deal.. not just racing lines and braking points .. you also need to know what to do in the what iffs moments to keep the car out of a wall .. or the grass you may not like it and thats your opinions
But dont disreguard drifting as a motorsport ..
that being said .. I'm an auto-xer and being a better drifter could of helped me out of many many close calls
car control is a huge deal.. not just racing lines and braking points .. you also need to know what to do in the what iffs moments to keep the car out of a wall .. or the grass you may not like it and thats your opinions
But dont disreguard drifting as a motorsport ..
that being said .. I'm an auto-xer and being a better drifter could of helped me out of many many close calls
#55
Junior Member
Join Date: Apr 2013
Location: Phoenix, AZ
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Mad Mike is at it again... Apologies if you've already seen this.
Interview
‘Mad' Mike Whiddett Conquers the crown: Pt 1 - Video | Red Bull Motorsports
Interview
‘Mad' Mike Whiddett Conquers the crown: Pt 1 - Video | Red Bull Motorsports
Last edited by Cal Naughton Jr; 05-14-13 at 01:24 AM.
#57
F**K THE SYSTEM!!
I have done my share of.drifting. and i will say... big angle low.speed drifts are easier and doesnt give you the heart pounding scaryness of a small angle, high speed, tarmac rally style, cornering .Drifting will never be as cool or as scary as grip driving. At the end of the day... drifters are kinda the posers of the motorsport world. Like monster trucks.
#59
I'd have to agree with Karack on this one.
Drifting is usually reserved for the energy drink guzzling teenagers here in Australia, who have no clue how to do anything mechanical to their cars, so they stick to "maaad wheel "fitment" yo."
As for that thing that "Mad" Mike has put together. Once upon a time it was probably a nice pristine FD in the showroom, with a sales brochure and smelled like a new FD when you opened the door and sat inside it. Look at it now Another one gone, a bit more of the pedigree lost to ignorance, I say.
Drifting is usually reserved for the energy drink guzzling teenagers here in Australia, who have no clue how to do anything mechanical to their cars, so they stick to "maaad wheel "fitment" yo."
As for that thing that "Mad" Mike has put together. Once upon a time it was probably a nice pristine FD in the showroom, with a sales brochure and smelled like a new FD when you opened the door and sat inside it. Look at it now Another one gone, a bit more of the pedigree lost to ignorance, I say.
#60
Bubblicious DEF.
iTrader: (36)
read the first page and gave up, typical rx7club bashing. this forum is so closed minded. there is more then one way to build an rx7 other then the typical 99 spec, single turbo, polished engine parts etc... this community has gone to **** in the past 4 years and you can really see it in the lack of posts and participants and meets. so many haters.
#62
F**K THE SYSTEM!!
Its.a wonderful car. But the real deal are those drivers going beyond to out do each other. There is no better feeling than clearing a corner faster than you ever thought possible.
#64
Ronald..
iTrader: (1)
Join Date: Aug 2005
Location: Fairfax/Manassas VA
Posts: 2,013
Likes: 0
Received 0 Likes
on
0 Posts
Quit all the bitching, the guy is one of the only ones left keeping the FD in the spot light. No, drifting isn't really my thing but who cares, he's built a bad *** car and we as fellow FD owners should support him. Just think it could be worse, it could have been a hellaflush car
#66
dorito powered
iTrader: (5)
Join Date: Mar 2008
Location: Lincoln, NE
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
read the first page and gave up, typical rx7club bashing. this forum is so closed minded. there is more then one way to build an rx7 other then the typical 99 spec, single turbo, polished engine parts etc... this community has gone to **** in the past 4 years and you can really see it in the lack of posts and participants and meets. so many haters.
#68
Garage Hero
iTrader: (93)
^saw the 6 rotor...kinda not so impressed.... 6 rotors..yea.. yea I'd rather see a nice different 2 rotor build. 6 rotors is just like a v-12... cool..but now what? ya know? I think people are ridiculous becuase they bash things that they're not into....when really anyone could bash what they're into. Whos to say that their opinion is any better than anyone elses?
Here's what I feel. Anything rotary i'll support. If it's powering a ford mustang...if it's in an air plane, if it's a 1 rotor shifter cart... I don't care.. I'll support it. If it's a bosozuka hella flush van sitting on 15x15" wheels.. guess what? I'll support it. Because without people using our cars... for whatever the hell they'll use them for... Rotary will dissappear.
<3 All Rotary
Here's what I feel. Anything rotary i'll support. If it's powering a ford mustang...if it's in an air plane, if it's a 1 rotor shifter cart... I don't care.. I'll support it. If it's a bosozuka hella flush van sitting on 15x15" wheels.. guess what? I'll support it. Because without people using our cars... for whatever the hell they'll use them for... Rotary will dissappear.
<3 All Rotary
#69
Big Bird's Here!!!
iTrader: (26)
^saw the 6 rotor...kinda not so impressed.... 6 rotors..yea.. yea I'd rather see a nice different 2 rotor build. 6 rotors is just like a v-12... cool..but now what? ya know? I think people are ridiculous becuase they bash things that they're not into....when really anyone could bash what they're into. Whos to say that their opinion is any better than anyone elses?
Here's what I feel. Anything rotary i'll support. If it's powering a ford mustang...if it's in an air plane, if it's a 1 rotor shifter cart... I don't care.. I'll support it. If it's a bosozuka hella flush van sitting on 15x15" wheels.. guess what? I'll support it. Because without people using our cars... for whatever the hell they'll use them for... Rotary will dissappear.
<3 All Rotary
Here's what I feel. Anything rotary i'll support. If it's powering a ford mustang...if it's in an air plane, if it's a 1 rotor shifter cart... I don't care.. I'll support it. If it's a bosozuka hella flush van sitting on 15x15" wheels.. guess what? I'll support it. Because without people using our cars... for whatever the hell they'll use them for... Rotary will dissappear.
<3 All Rotary
Rotary engines are what make our cars so desirable and unique. It was one man's crazy vision of what a true sports car should be, a rotary powered dream. His idea pushed the boundaries and paved the way for great cars like the Cosmo, rx7, 787, etc. So if someone wants to build a tricked out 4 rotor to slide around corners more power to them! Keep the Rotary alive people!!!
#70
Thread
Thread Starter
Forum
Replies
Last Post