I've got a loose knock sensor I belive, the wire is black on the end of a big nut above the rear rotor spark plugs. Now what I want to know is where this need to connect to. I have another loose wire which seems like they may be been connected together atsome stage, but is not a white colour like the FSM suggests. where do I neeed to be looking for this white wire for the knock sensor?


any help is appreciated.


thanks

 

what year are you working on, what motor, any mods that would involve mix/matched wiring?

Edit: disregard I didn't notice 3rd gen.. which I have no knowledge.. hope you get the answer to this...

 

The knock sensor connects to the emissions harness. The connection is usually located in between the UIM and the alternator (based on how the emission harness is normally routed).

 

so I do need to connect to a single 'white' wire correct?

 

Right, tried searching everywhere for a white single wire, cant find it. the wire that it looks like it was connected to, (its not a plug they look like theve been cut and connected) is blue with yellow strip and red dots . does any one know what this wire is for ?

 

no one knows where I need to be looking for this connector or wire?

 

no body knows where the female end is located ?

 

You might want to post up a picture of what you have. For the LHD cars, here's the harness: