Limp Mode
03-22-02, 04:04 PM
#2
The 7 can't lose!
Join Date: Feb 2002
Location: Adelaide, South Australia
Posts: 487
Likes: 0
Received 1 Like
on
1 Post
Re: Limp Mode
Originally posted by Rated R1
What exactly happens when the stock ECU goes into limp mode? i.e. are the rpms limited, boost etc. TIA
What exactly happens when the stock ECU goes into limp mode? i.e. are the rpms limited, boost etc. TIA
Cheers,
Dave
03-22-02, 04:09 PM
#3
HARRRRRRRRR
Join Date: Jan 2002
Location: Marietta GA
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
you will be able to rev still but you will be limited to your boost. I only boosted to about 2 psi b4 it would start shuttering like there was a fuel cut or something. What you need to do is disconnect the negative termanal from the battery and stand on the brake for 30 sec. This reboots the ecu and yoiu are all set.
11-21-02, 11:01 AM
#4
Senior Member
iTrader: (3)
Join Date: Jun 2002
Location: Atlanta
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
What happens if the problem comes back. I reset my ecu like 3 times already. I checked the code this morning and told me it was a fuel relay. I replaced it so I'll see if that was the prob. Did your problem keep coming back?
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 09:33 AM