Just want to introduce myself
Just want to introduce myself
Hello all, I have been a lover of the FD's for quite a long time and i have finally found the right one for me. Its a white 1995 touring model with a black leather interior. Im still reading up on the workings of the FD's as i am not familiar with them, i downloaded and printed the FSM and it has already proven itself to be extreamly useful.
I have a few parts in my living room that need to be installed but i am waiting for a few more to get here befor i begin any of that. The parts that are waiting to go in are, fluidyne radiator, alum AST, 180 degree thermostat, 185 degree fan switch, and a downpipe coated in header wrap. im hoping all this lowers my underhood temps drastically!
Now for my question befor i show you all some pics of my new baby, im planning on installing all this with some new gauges (coolant temp, boost/vacume gauge and an oil PSI gauge) and im having problems figuring out the best way to install the oil psi gauge. Im thinking about using an oil filter sandwich adapter, however im not sure on where i can locate one that is not cheap ebay crap and will match my autometer z series sending unit(electric model not mechanical). any help or segustions would be greatly appreciated.
also on a small side note, i just installed a very high end stereo and had some problems with the head unit, how did you all overcome the fact that there is not mounting brackets behind the stock pieces. Pics of your installs would be great if you have them. I will post pics of mine once i take some.
-once again thanks for your time and i look forward to utalizing this forums vast knowledge and resources.
here are a few pics of my husbands Z32
yes i will be making my engine bay pretty too, probably with some powdercoating and polishing!
I have a few parts in my living room that need to be installed but i am waiting for a few more to get here befor i begin any of that. The parts that are waiting to go in are, fluidyne radiator, alum AST, 180 degree thermostat, 185 degree fan switch, and a downpipe coated in header wrap. im hoping all this lowers my underhood temps drastically!
Now for my question befor i show you all some pics of my new baby, im planning on installing all this with some new gauges (coolant temp, boost/vacume gauge and an oil PSI gauge) and im having problems figuring out the best way to install the oil psi gauge. Im thinking about using an oil filter sandwich adapter, however im not sure on where i can locate one that is not cheap ebay crap and will match my autometer z series sending unit(electric model not mechanical). any help or segustions would be greatly appreciated.
also on a small side note, i just installed a very high end stereo and had some problems with the head unit, how did you all overcome the fact that there is not mounting brackets behind the stock pieces. Pics of your installs would be great if you have them. I will post pics of mine once i take some.
-once again thanks for your time and i look forward to utalizing this forums vast knowledge and resources.
here are a few pics of my husbands Z32
yes i will be making my engine bay pretty too, probably with some powdercoating and polishing!
Originally Posted by MakoRacing
Everyone knows VR is COMMON 
BTW nice car
BTW nice car
don't worry....my FD's VR
anyway...nice color, if i had a choice...i too would've picked up a chaste white FD... but oh well...the car in general is just worth having in itself
welcome aboard to the club....so sit back, relax, grab some food, plenty of drinks and the FAQs are your friend
Trending Topics
This is what you'll need for Oil Temp and Pressure. It says RX8, but it will work on the FD. I'm getting ready to order one myself.
http://www.racingbeat.com/resultset....rtnumber=11803
Welcome to the forum, car looks great.
http://www.racingbeat.com/resultset....rtnumber=11803
Welcome to the forum, car looks great.
Rotary Freak
Joined: Dec 2001
Posts: 1,803
Likes: 0
From: Macungie, Pennsylvania
Welcome!! Nice to see that the ladies are down too! There was a guy here on the forum (don't remember his sig right now. I'm sure some of the guys here know. If not, I can get it later) selling an aluminum replacement oil filter mount with the fitting for an oil temp gauge. I bought one and it's very nice, expecially after I polished it!
As far as the head unit is concerned, there should'nt have been a problem installing it. There should be a small bracket that came with the head unit that bolts to the back for support. This is because there is just an opening in the car and not a sleeve. Hope you understand what I'm trying to say (yes, I know there is a sleeve that comes with the head unit. This is not what I'm talking about).
As far as the head unit is concerned, there should'nt have been a problem installing it. There should be a small bracket that came with the head unit that bolts to the back for support. This is because there is just an opening in the car and not a sleeve. Hope you understand what I'm trying to say (yes, I know there is a sleeve that comes with the head unit. This is not what I'm talking about).
Lives on the Forum
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
Originally Posted by A3ON7
white RX7 is kind of a limited edition color. So you're really lucky to get that color, i think they only produce 250 cars of that color in the US right?
Welcome to the club, Miss_liss_a. Looks like you've got a clean 95 there...
Welcome to the club. Not sure why you decided on an oil pressure gauge when the car already has one. An oil temp gauge might be more useful.
Nice choice on the color of your car. I wish I had a white FD!! Oh wait ..................
Nice choice on the color of your car
. I wish I had a white FD!! Oh wait ..................
Originally Posted by adam c
Not sure why you decided on an oil pressure gauge when the car already has one.
honeymoon pic.