3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

J Spec 280 Hp

Thread Tools
 
Search this Thread
 
Old 08-16-03, 01:52 PM
  #1  
Junior Member

Thread Starter
 
Join Date: Sep 2001
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
J Spec 280 Hp

The motors in the latest J spec Rx-7's put out 280 Hp. So, exactly what is it that produces the higher power? I know they have better turbos. Is it that these turbos put out higher boost or what???
Old 08-16-03, 01:56 PM
  #2  
Eats, Sleeps, Dreams Rotary

 
7racer's Avatar
 
Join Date: Apr 2001
Location: Dallas, Texas
Posts: 3,736
Likes: 0
Received 9 Likes on 9 Posts
The engine is the same....but I think it was the combination of the intake and turbos...

http://www.rx7.net.nz/newrx7.htm
Old 08-16-03, 02:04 PM
  #3  
Junior Member

Thread Starter
 
Join Date: Sep 2001
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
OK, I read the link and it says the turbos are more efficient because they generate more air flow. That suggests to me that the 280 Hp engine runs at higher boost then does our US spec version. Anyone know how high the boost level is??
Old 08-16-03, 03:14 PM
  #4  
Eats, Sleeps, Dreams Rotary

 
7racer's Avatar
 
Join Date: Apr 2001
Location: Dallas, Texas
Posts: 3,736
Likes: 0
Received 9 Likes on 9 Posts
ummm read alil further then or more carefully. It says that the boost is up from 0.62 bar to 0.74 bar
Old 08-16-03, 05:04 PM
  #5  
FOR SALE

 
ijneb's Avatar
 
Join Date: Jun 2002
Location: Central Florida
Posts: 738
Likes: 0
Received 0 Likes on 0 Posts
Also they flow better because of the Y-pipe. It comes with the "efini" y pipe that we have to buy.
Old 08-16-03, 05:33 PM
  #6  
Comp Yellow Mica

 
Qball's Avatar
 
Join Date: Jan 2002
Location: california
Posts: 516
Likes: 0
Received 0 Likes on 0 Posts
the rx7 in japan dosent have a cat in the downpipe. there's most of the power right there.

the newer rx7s have a slightly different intake.

the turbos have a smaller impellar for it to spool faster and a bigger compressor to push a little more air.
Old 08-16-03, 05:48 PM
  #7  
Junior Member

Thread Starter
 
Join Date: Sep 2001
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
OK, so with what amounts to a downpipe and more efficient turbos the max boost on the J spec jumps to 0.74 bar (10.7 psi) from 0.62 bar (US spec?) (9.0 psi).
Old 08-16-03, 08:02 PM
  #8  
Rotary Enthusiast

 
1bad7's Avatar
 
Join Date: Oct 2001
Location: cambridge
Posts: 793
Likes: 0
Received 0 Likes on 0 Posts
a less restrictive intake and exhaust will cause a slight increase in boost... im sure that its programmed for the higher boost though
Old 08-16-03, 09:14 PM
  #9  
Junior Member

Thread Starter
 
Join Date: Sep 2001
Location: Houston
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
I agree. It appears as if the stock engine is capable of 280 hp without any reduction in reliability if you install a downpipe and upgrade the ECU.
Old 08-16-03, 10:50 PM
  #10  
Wankler

 
DaiOni's Avatar
 
Join Date: Apr 2003
Location: Kobe, Japan
Posts: 1,565
Likes: 0
Received 0 Likes on 0 Posts
"the rx7 in japan dosent have a cat in the downpipe. there's most of the power right there"

the 255hp jdm fd didn't have a dp cat either.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotary12Ahead
1st Generation Specific (1979-1985)
9
10-29-15 03:16 PM
edgars95rx7
Link Vi-PEC
0
10-01-15 01:59 PM



Quick Reply: J Spec 280 Hp



All times are GMT -5. The time now is 12:01 AM.