interior clip cross refrence?
#1
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Orion
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
interior clip cross refrence?
I searched, and the worst part is I know ive seen something about it. I am trying to get a hold off the 4 or 5 different types of clips mazda used to hold down the interior plastic pieces. The local stores here do not carry them (atleast under mazda name)
anyways. thank you.
anyways. thank you.
#3
Banned. I got OWNED!!!
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: Orion
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
its not that I cant find them...
my question is, does anyone sell them online? and do any other vehicles use the same clips that are easier to find? I dont like having to call places since Im usually asleep during normal store hours. an
my question is, does anyone sell them online? and do any other vehicles use the same clips that are easier to find? I dont like having to call places since Im usually asleep during normal store hours. an
#6
Senior Member
iTrader: (1)
I have had to change out a bunch of the clips, I have found two that work quite well so far, the metal ones are a little longer then stock but the bumps that hold them are in the right places. As for the plastic push pin style I changed to a different style something I can get out a little easier only thing is you need something to tap them in place as the fitment is a little tight. I went with something tighter to help minimize the squeaks and rattles. The part numbers are from NAPA should be the same number in the states as canada.
The metal clips are part number 665-2322 (5 in a bag)
The push-pin plastic clips are 665-3135 (10 in a bag) (you need to take the two pieces apart, push the one piece into the panel then tap the other piece back in, I used a hammer and tapped lightly)
You can order these online from Napa or cross the parts in Lordco ect.
I also have a retainer for the door panels I just can not find the package atm I will post when i find the number
Good luck
Mike
The metal clips are part number 665-2322 (5 in a bag)
The push-pin plastic clips are 665-3135 (10 in a bag) (you need to take the two pieces apart, push the one piece into the panel then tap the other piece back in, I used a hammer and tapped lightly)
You can order these online from Napa or cross the parts in Lordco ect.
I also have a retainer for the door panels I just can not find the package atm I will post when i find the number
Good luck
Mike
Last edited by MSilk; 04-26-10 at 10:35 PM. Reason: More Info
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post