Installing Front Intercooler - Picture needed
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Installing Front Intercooler - Picture needed
Any chance someone has a picture of all these brackets should mount in the front of the car?
The front intercooler kit has a few brackets that I can't figure where to bolt it.
Yep...there is no installation instructions.
Thank you
The front intercooler kit has a few brackets that I can't figure where to bolt it.
Yep...there is no installation instructions.
Thank you
#2
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I put a letter "A to G " on the brackets -- can someone assist me what bracket used for the middle bracket of the intercooler and which bracket used for the two side end.
There is also a brass spacer that I don't know where to go.
I appreciate any help.
Thank you
There is also a brass spacer that I don't know where to go.
I appreciate any help.
Thank you
#5
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Judging the similar intercooler, does not seems angled. I can't also see how those brackets in the picture will work. None of these brackets correspond to any of the holes or anything I can bolt into.
This intercooler probably not for Rx-7 --- probably its generic for many particular install. Maybe I need to make my own bracket.
This intercooler probably not for Rx-7 --- probably its generic for many particular install. Maybe I need to make my own bracket.
#6
Full Member
iTrader: (3)
download the install instructions from Greddy. http://www.greddy.com/upload/file/12050054,55_i.pdf
A brackets mount to the lower stock radiator brackets.
B is for the condesor.
C is for the power steering lines
A brackets mount to the lower stock radiator brackets.
B is for the condesor.
C is for the power steering lines
#7
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Thank you Mrrx7,
By quickly reading the greddy instruction ... seems all the bracket questions are stated in the manual.
I also noticed that I need to adjust the aircondition condenser by using a bracket supplied.
I will read more.....
By quickly reading the greddy instruction ... seems all the bracket questions are stated in the manual.
I also noticed that I need to adjust the aircondition condenser by using a bracket supplied.
I will read more.....
Trending Topics
#8
Senior Member
iTrader: (13)
heres another link with colour pictures that may help, i did my rx7store m spec FMIC kit a couple weeks ago and it did me good
tom94RX-7 Pictures
tom94RX-7 Pictures
#9
Full Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: ccc
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
heres another link with colour pictures that may help, i did my rx7store m spec FMIC kit a couple weeks ago and it did me good
tom94RX-7 Pictures
tom94RX-7 Pictures
Looking at your install, did you get rid of your air condition & the condenser?
the pictures will help me a lot !!!!
#10
Senior Member
iTrader: (13)
lol my names scott , i guess tom is the guy that made the link up , and yes he got rid of his as did i although mine was not working in the first place ie needed to be re-charged and in the long run i dont really use air conditioning in the first place i didnt waste time on removing mine
glad the link could help
glad the link could help
Thread
Thread Starter
Forum
Replies
Last Post