Installed Enkei RP01's (pics) :)
#1
Rotary Freak
Thread Starter
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Installed Enkei RP01's (pics) :)
Finally got a set of gunmetal 17" Enkei RP01 wheels that I wanted for so long. They are very rare in Europe. Fronts are 8x17 ET38 with 235/40/17, rears 9x17 ET38with 255/40/17. Tyres are awesome Bridgestone RE540's, at $380 per rear tyre and $320 per front tyre they're ugh... expensive
Here are some pics from the trackday this past Sunday:
With Eibachs, these wheels/tyres and good alignment I managed to drop more then 2.5seconds off my previous best time
Here are some pics from the trackday this past Sunday:
With Eibachs, these wheels/tyres and good alignment I managed to drop more then 2.5seconds off my previous best time
#5
Rotary Freak
Thread Starter
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Lol... I knew I shouldn't have posted that pic - it distracts attention from the wheels
Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
#6
Senior Member
Join Date: Dec 2003
Location: Delaware
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cruiser
Lol... I knew I shouldn't have posted that pic - it distracts attention from the wheels
Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
But seriously though the wheels look really good. I love the color you went with to go on the red car, it looks really race-inspired and I love it.
Glad to see you actually use the car also!!!
Very nice FD and keep us updated
-Adam
#7
Place your ad here...
Yep, think I agree with SurroundedBySe7ens: I like the seat-cover on your passenger seat a lot more than the wheels.
Seriously though, rims look real good. You guys don't have a requirement to run track events with the windows down?
-Rob
Seriously though, rims look real good. You guys don't have a requirement to run track events with the windows down?
-Rob
Trending Topics
#8
Rotary Freak
Thread Starter
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Well, I'm still debating with myself whether to get them powdercoated in silver or white.
What is everyone elses opinion ?
Sometimes I like it, sometimes I think brighter color would be nicer, although like it is now looks very exotic
What is everyone elses opinion ?
Sometimes I like it, sometimes I think brighter color would be nicer, although like it is now looks very exotic
#9
Rotary Enthusiast
Join Date: Aug 2002
Location: New York
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cruiser
Well, I'm still debating with myself whether to get them powdercoated in silver or white.
What is everyone elses opinion ?
Sometimes I like it, sometimes I think brighter color would be nicer, although like it is now looks very exotic
What is everyone elses opinion ?
Sometimes I like it, sometimes I think brighter color would be nicer, although like it is now looks very exotic
I agree about that seat cover though, funny I was going to mention her before the rims too lol. Good going...
#11
Rotary Freak
Thread Starter
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by saxyman990
Seriously though, rims look real good. You guys don't have a requirement to run track events with the windows down? -Rob
We rent a track and set our own rules. No requirements, everyone takes care of himself. Stupid, dangerous ? Maybe, but without incidents so far (hope it stays this way).
#15
Banned. I got OWNED!!!
Leave'm that color....they look good. I just dont dig the chin spoiler thats red...kinda offsets the color scheme on the 7 a bit. I'd go back to black on it if ya could.
#16
Junior Member
Join Date: Mar 2001
Location: Alexandria, KY
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx7dv8
Leave'm that color....they look good. I just dont dig the chin spoiler thats red...kinda offsets the color scheme on the 7 a bit. I'd go back to black on it if ya could.
Steve
#18
Rotary Freak
Thread Starter
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mahjik
It still blows my mind seeing you guys tracking without helmets.
Haha... but check out the guy on the bike behind me.
What was interesting was the fact that there was no way he could lap faster then me. Later in the pits he came over and we talked a bit - he was REALLY SURPRISED how well I was doing on the straights (only ran 10psi) not to mention the corners where he really got left behind. Only portion of track where he was superior was at braking after long straights.
We ran equal laptimes for 3-4 laps, then I let him pass and followed at a distance and it was the same.
RX7 can't loose lol
Anyone can tell what kind of bike it is ?
#19
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,895
Likes: 0
Received 114 Likes
on
66 Posts
Enkie RP01 are rarely than you think as they stopped making them about two years ago. They were replaced by the RP02s.
Here is one of my 9X17s that were custom refinished.
Here is one of my 9X17s that were custom refinished.
#25
The bomb is in the toy!1!
iTrader: (4)
Originally Posted by cruiser
Lol... I knew I shouldn't have posted that pic - it distracts attention from the wheels
Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food