3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Installed Enkei RP01's (pics) :)

Thread Tools
 
Search this Thread
 
Old 04-05-05, 11:06 AM
  #1  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Installed Enkei RP01's (pics) :)

Finally got a set of gunmetal 17" Enkei RP01 wheels that I wanted for so long. They are very rare in Europe. Fronts are 8x17 ET38 with 235/40/17, rears 9x17 ET38with 255/40/17. Tyres are awesome Bridgestone RE540's, at $380 per rear tyre and $320 per front tyre they're ugh... expensive

Here are some pics from the trackday this past Sunday:






With Eibachs, these wheels/tyres and good alignment I managed to drop more then 2.5seconds off my previous best time
Old 04-05-05, 11:13 AM
  #2  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts


Old 04-05-05, 11:13 AM
  #3  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts


Old 04-05-05, 11:14 AM
  #4  
Senior Member

 
SurroundedBySe7ens's Avatar
 
Join Date: Dec 2003
Location: Delaware
Posts: 299
Likes: 0
Received 0 Likes on 0 Posts
The wheels look great......but who's that blonde sitting in the passenger seat in the first pic?

-Adam

Last edited by SurroundedBySe7ens; 04-05-05 at 11:17 AM.
Old 04-05-05, 11:18 AM
  #5  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Lol... I knew I shouldn't have posted that pic - it distracts attention from the wheels

Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
Old 04-05-05, 11:21 AM
  #6  
Senior Member

 
SurroundedBySe7ens's Avatar
 
Join Date: Dec 2003
Location: Delaware
Posts: 299
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by cruiser
Lol... I knew I shouldn't have posted that pic - it distracts attention from the wheels

Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
Hahaha I'm just messing with ya

But seriously though the wheels look really good. I love the color you went with to go on the red car, it looks really race-inspired and I love it.

Glad to see you actually use the car also!!!

Very nice FD and keep us updated

-Adam
Old 04-05-05, 11:26 AM
  #7  
Place your ad here...

 
saxyman990's Avatar
 
Join Date: Apr 2002
Location: Dayton, OH
Posts: 1,336
Likes: 0
Received 2 Likes on 2 Posts
Yep, think I agree with SurroundedBySe7ens: I like the seat-cover on your passenger seat a lot more than the wheels.

Seriously though, rims look real good. You guys don't have a requirement to run track events with the windows down?

-Rob
Old 04-05-05, 11:27 AM
  #8  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Well, I'm still debating with myself whether to get them powdercoated in silver or white.
What is everyone elses opinion ?

Sometimes I like it, sometimes I think brighter color would be nicer, although like it is now looks very exotic
Old 04-05-05, 11:36 AM
  #9  
Rotary Enthusiast

 
PhoenixDownVII's Avatar
 
Join Date: Aug 2002
Location: New York
Posts: 1,050
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by cruiser
Well, I'm still debating with myself whether to get them powdercoated in silver or white.
What is everyone elses opinion ?

Sometimes I like it, sometimes I think brighter color would be nicer, although like it is now looks very exotic
NO! Leave them black. White is too formal and silver is okay I guess, but the car looks awesome.

I agree about that seat cover though, funny I was going to mention her before the rims too lol. Good going...
Old 04-05-05, 11:37 AM
  #10  
Full Member

 
Gremlin1802's Avatar
 
Join Date: Sep 2003
Location: Laurel/Hattiesburg, MS
Posts: 109
Likes: 0
Received 0 Likes on 0 Posts
I've had the same exact rims in silver for a while now. They do look good on the FD.
Attached Thumbnails Installed Enkei RP01's (pics) :)-rx7_fav1.jpg  

Last edited by Gremlin1802; 04-05-05 at 11:43 AM.
Old 04-05-05, 11:44 AM
  #11  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by saxyman990
Seriously though, rims look real good. You guys don't have a requirement to run track events with the windows down? -Rob
Thanks :-)

We rent a track and set our own rules. No requirements, everyone takes care of himself. Stupid, dangerous ? Maybe, but without incidents so far (hope it stays this way).
Old 04-05-05, 11:45 AM
  #12  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Wheels are not black, but a darker shade of gunmetal
They're just dirty from brake dust on the pics.
Old 04-05-05, 12:28 PM
  #13  
1993 VR FD Touring

 
RX 4 Speed's Avatar
 
Join Date: Jun 2004
Location: USA
Posts: 650
Likes: 0
Received 0 Likes on 0 Posts
pics don't work... red x's is what i see
Old 04-05-05, 01:35 PM
  #14  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RX 4 Speed
pics don't work... red x's is what i see
I think server was down for maintenance. It should be fine now
Old 04-05-05, 01:39 PM
  #15  
Banned. I got OWNED!!!
 
rx7dv8's Avatar
 
Join Date: Mar 2002
Location: Cincinnati
Posts: 623
Likes: 0
Received 1 Like on 1 Post
Leave'm that color....they look good. I just dont dig the chin spoiler thats red...kinda offsets the color scheme on the 7 a bit. I'd go back to black on it if ya could.
Old 04-05-05, 01:42 PM
  #16  
Junior Member

 
SteveF's Avatar
 
Join Date: Mar 2001
Location: Alexandria, KY
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by rx7dv8
Leave'm that color....they look good. I just dont dig the chin spoiler thats red...kinda offsets the color scheme on the 7 a bit. I'd go back to black on it if ya could.
I like the wheels a lot. I kinda agree though that a black lip would look great with the black wheels.

Steve
Old 04-05-05, 01:44 PM
  #17  
Mr. Links

iTrader: (1)
 
Mahjik's Avatar
 
Join Date: Aug 2001
Location: Kansas City, MO
Posts: 27,595
Received 40 Likes on 26 Posts
Thumbs up

Looks great (as well as a lot of fun)!

It still blows my mind seeing you guys tracking without helmets.
Old 04-05-05, 01:50 PM
  #18  
Rotary Freak

Thread Starter
 
cruiser's Avatar
 
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Mahjik
It still blows my mind seeing you guys tracking without helmets.
You know how we do tracdays - we rent a track and we do what we want. %50 of drivers are drifters anyway

Haha... but check out the guy on the bike behind me.
What was interesting was the fact that there was no way he could lap faster then me. Later in the pits he came over and we talked a bit - he was REALLY SURPRISED how well I was doing on the straights (only ran 10psi) not to mention the corners where he really got left behind. Only portion of track where he was superior was at braking after long straights.

We ran equal laptimes for 3-4 laps, then I let him pass and followed at a distance and it was the same.

RX7 can't loose lol

Anyone can tell what kind of bike it is ?
Old 04-05-05, 02:35 PM
  #19  
Eye In The Sky

iTrader: (2)
 
cewrx7r1's Avatar
 
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes on 66 Posts
Enkie RP01 are rarely than you think as they stopped making them about two years ago. They were replaced by the RP02s.

Here is one of my 9X17s that were custom refinished.
Old 04-05-05, 09:02 PM
  #20  
Senior Member

 
sicminded's Avatar
 
Join Date: Nov 2002
Location: bay area
Posts: 262
Likes: 0
Received 0 Likes on 0 Posts
nice. nice of your girl to share in your interest. thats sometimes rare.

chris
Old 04-06-05, 02:32 AM
  #21  
Senior Member

iTrader: (1)
 
Riccardo's Avatar
 
Join Date: Mar 2003
Location: Greece
Posts: 667
Likes: 0
Received 4 Likes on 4 Posts
I really like them Cruiser
Good Choice!
Old 04-06-05, 03:37 AM
  #22  
Lives on the Forum

 
rynberg's Avatar
 
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes on 8 Posts
Hey, nice wheels, man.

Be careful on the track.
Old 04-06-05, 05:02 PM
  #23  
SINFUL7

iTrader: (37)
 
KaiFD3S's Avatar
 
Join Date: Apr 2004
Location: Alaska
Posts: 6,574
Received 1 Like on 1 Post
I love them...
Old 04-06-05, 05:09 PM
  #24  
Zero Rotor

 
aggiefd's Avatar
 
Join Date: Apr 2005
Location: Dallas, TX
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Those look great... nice job.
Old 04-06-05, 05:29 PM
  #25  
The bomb is in the toy!1!

iTrader: (4)
 
cloud9's Avatar
 
Join Date: Oct 2003
Location: Dallas Tx.
Posts: 2,176
Received 264 Likes on 154 Posts
Originally Posted by cruiser
Lol... I knew I shouldn't have posted that pic - it distracts attention from the wheels

Its the same girl as in my avatar. My girlfriend. In that pic we jumped out (out of track) for a coffe break and some food
ummm no offense but I have always thought that the person in your avatar was a man with a wig on.... lol sorry


Quick Reply: Installed Enkei RP01's (pics) :)



All times are GMT -5. The time now is 04:52 PM.