Injector Cleaners need inputs from experts!!!!
#1
Original94
Thread Starter
Injector Cleaners need inputs from experts!!!!
Can anyone please tell me which injector cleaner I can add to my gas tank to clean the injectors the best so that I can go and buy some.Thanks for your help please respond.
Many thanks fcapo
Many thanks fcapo
#3
Lives on the Forum
#5
Moderator
iTrader: (7)
IMHO, the only thing that you can put in your tank that really helps injectors is Sta-Bil, which goes in before the car is stored for any length of time. This at least helps prevent deposits from forming.
If you suspect the injectors aren't working right, IMHO the ultrasonic cleaning *with* before/after testing is the only meaningful method.
If you suspect the injectors aren't working right, IMHO the ultrasonic cleaning *with* before/after testing is the only meaningful method.
#7
Urban Combat Vet
iTrader: (16)
Chevron-Techron fuel system and injector cleaner. I buy it on sale and put a bottle in every few months, generally in spring and fall.
Don't think it's advertised for carbs, but it was most recently effective this summer in freeing a sticking float on antique car of mine.
Don't think it's advertised for carbs, but it was most recently effective this summer in freeing a sticking float on antique car of mine.
Trending Topics
#8
Senior Member
iTrader: (8)
I recently failed emissions with year old gasoline and a poorly warmed up FD. I put in a bottle of Gumout fuel injection cleaner and spent the week driving as hard and much as I could.....logging about 300 miles. It passed emissions with flying colors - not even close. It went from 4 times the legal limit of HC and CO to almost zero. The gas was new and the car was hot. It could have been any or all of those factors....but I do think the cleaner helped.
#9
TANSTAFL
iTrader: (13)
http://www.cleaninjectors.com/
I really liked those guys. ^
Cleaners in a bottle are nothing but kerosene and snake oil.
I really liked those guys. ^
Cleaners in a bottle are nothing but kerosene and snake oil.
#11
Im a tall midget.
iTrader: (28)
These guys are good as well: http://www.witchhunter.com/
Another popular one: http://www.rceng.com/
I've never used over the counter injector cleaners but I usually hear of people running the Chevron Techron stuff. Dont know how well it works but the best way to clean them is to send them out for ultrasonic cleaning.
Another popular one: http://www.rceng.com/
I've never used over the counter injector cleaners but I usually hear of people running the Chevron Techron stuff. Dont know how well it works but the best way to clean them is to send them out for ultrasonic cleaning.
#12
White chicks > *
iTrader: (33)
I have heard of people using some of this "better" fuel cleaners as extra insurance and it makes the car run WORSE than it did before they put it.
Why is that?
Like for instance, my car runs fine, no smoke out the exhaust but i have never used any type of fuel cleaner in my car since the day i got it. My car is getting even older so maybe a bottle wont hurt. I dont want to put a bottle of this and have a crapstorm come my way.
Should i do it? Or follow the phrase, "if it aint broke, dont fix it"?
Why is that?
Like for instance, my car runs fine, no smoke out the exhaust but i have never used any type of fuel cleaner in my car since the day i got it. My car is getting even older so maybe a bottle wont hurt. I dont want to put a bottle of this and have a crapstorm come my way.
Should i do it? Or follow the phrase, "if it aint broke, dont fix it"?
#13
Lives on the Forum
iTrader: (13)
As some have stated the best way to correct a spray pattern or sticking injector issue is to send them in for cleaning and testing.
If you don't have the time to do that and you rely on the vehicle for transportation then I recommend BG44k.
When I was a Service Manager we used it and it worked extremely well for anywhere from restoring compression (in valved engines where large deposits had formed on the valves, causing them not to seat correctly.) to curing issues caused by fuel system contamination.
It is expensive being at around $26 a can and can only be found at dealerships and some garages.
The other alternative is Lucas fuel system treatment or the Gumont Regane as I have seen good results with both of those.
As lwnslw stated about the Lucas and getting better performance and mileage. I have had the same results when I take long trips with my Truck or when I tow with my Truck.
But as stated above if you suspect it is an injector issue and have don't have to rely on that vehicle then send them in for cleaning and testing.
If you don't have the time to do that and you rely on the vehicle for transportation then I recommend BG44k.
When I was a Service Manager we used it and it worked extremely well for anywhere from restoring compression (in valved engines where large deposits had formed on the valves, causing them not to seat correctly.) to curing issues caused by fuel system contamination.
It is expensive being at around $26 a can and can only be found at dealerships and some garages.
The other alternative is Lucas fuel system treatment or the Gumont Regane as I have seen good results with both of those.
As lwnslw stated about the Lucas and getting better performance and mileage. I have had the same results when I take long trips with my Truck or when I tow with my Truck.
But as stated above if you suspect it is an injector issue and have don't have to rely on that vehicle then send them in for cleaning and testing.
Last edited by Rx-7Doctor; 09-13-08 at 07:41 PM.
#15
Full Member
iTrader: (7)
Join Date: Oct 2008
Location: Montreal, QC
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Digging up this old thread...
I found one TSB talking about injector cleaner, has anyone got feedback on that by any chance?
----------------------------------------------------------
10. FUEL INJECTOR CLEANER
Service bulletin #001/93, Category F
Applies to all fuel injected models
To improve fuel injection performance, Mazda has tested and
approved a highly effective fuel injector cleaner. The kit and
cleaner is recommended for all Mazda fuel injection systems.
Mazda's fuel injector cleaner uses a chemical reducing agent
rather than the common solvent used in typical aftermarket
cleaners. As a result, in tests against aftermarket competitors,
Mazda's cleaner outperformed all others and was the only one to
restore the fuel injector's flow rate to original factory specs.
Mazda recommends cleaning injectors every 15,000 miles.
DESCRIPTION PART# REMARKS
Fuel Injector Cleaner 0000 77 2019 case of 12 cans
Tool kit 0000 77 2026 w/ instructions
(req'd for use with the cleaner)
Service brochures 9999 95 043N 92 QTY: 1 package = 50
brochures
----------------------------------------------------------
I found one TSB talking about injector cleaner, has anyone got feedback on that by any chance?
----------------------------------------------------------
10. FUEL INJECTOR CLEANER
Service bulletin #001/93, Category F
Applies to all fuel injected models
To improve fuel injection performance, Mazda has tested and
approved a highly effective fuel injector cleaner. The kit and
cleaner is recommended for all Mazda fuel injection systems.
Mazda's fuel injector cleaner uses a chemical reducing agent
rather than the common solvent used in typical aftermarket
cleaners. As a result, in tests against aftermarket competitors,
Mazda's cleaner outperformed all others and was the only one to
restore the fuel injector's flow rate to original factory specs.
Mazda recommends cleaning injectors every 15,000 miles.
DESCRIPTION PART# REMARKS
Fuel Injector Cleaner 0000 77 2019 case of 12 cans
Tool kit 0000 77 2026 w/ instructions
(req'd for use with the cleaner)
Service brochures 9999 95 043N 92 QTY: 1 package = 50
brochures
----------------------------------------------------------
#16
Mazzei Formula
iTrader: (6)
Listen to me. I had a sticking injector. I didn't realize it was even a problem until I installed a midpipe. WOW....I had thick white smoke (NOT COOLANT), GASOLINE in the air when I cranked the car.
When I removed my turbo's to port the wastegate, GASOLINE poured onto the floor of my garage!!!!
I used Chevron INjector cleaner a number of times and it didn't do anything. Pulled injectors and shipped them to witch hunter, problem solved completely.
When I removed my turbo's to port the wastegate, GASOLINE poured onto the floor of my garage!!!!
I used Chevron INjector cleaner a number of times and it didn't do anything. Pulled injectors and shipped them to witch hunter, problem solved completely.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM