Identify these intake hoses?
#1
Identify these intake hoses?
These were on the car when I bought it. During my current rebuild I found a couple of small holes in them so they are done. Problem is, I don't have the brand or size. Aeroquip maybe? Where would I find replacements?
Thanks
Steve
Thanks
Steve
#2
Mr. Links
iTrader: (1)
They just look like generic couplers to me. You can find some here:
ATP Turbo
Personally, I prefer Hose Techniques:
http://www.hosetechniques.com/products/index.php
A buddy of mine trying just about all of them out there and had the least amount of issues with Hose Technique couplers. So, I started using them a few years back and have had the same good luck.
As far as size, do you need intake or intercooler couplers?
ATP Turbo
Personally, I prefer Hose Techniques:
http://www.hosetechniques.com/products/index.php
A buddy of mine trying just about all of them out there and had the least amount of issues with Hose Technique couplers. So, I started using them a few years back and have had the same good luck.
As far as size, do you need intake or intercooler couplers?
#3
Senior Member
iTrader: (1)
Join Date: Nov 2006
Location: Ontario
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
All those are are 4 ply reinforced silicone couplers. Most likley 2.75" Inner Diameter by 3" length (you should measure to make sure). Any performance shop will have them or can get them. Just make sure you get the 4 ply reinforced ones and not the cheap ebay ones which will burst.
Here are just a few of the hundreds to chose from...
http://vibrantperformance.com/catalo...b67c6161d4e2a9
http://www.turboneticsinc.com/produc...ategory_id=107
EDIT: Mahjik beat me to it.
Here are just a few of the hundreds to chose from...
http://vibrantperformance.com/catalo...b67c6161d4e2a9
http://www.turboneticsinc.com/produc...ategory_id=107
EDIT: Mahjik beat me to it.
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM