installed my greddy profec spec 2 ebc yesterday but i can not find a good spot for the controller itself. my car is rhd and i was thinking of sticking it in the leg pad on the hump or inside the map pocket in the door but before i cut up expensive and nice interior pieces, i thought id ask around.

i want to keep it accessable but out of the way. no two sided tape on the dashboard.

so lets see yours.

 

Do you have an open din pocket? I used to put mine there before I hooked up power FC boost control, now I just use the PFC commander.

 

I have the stock stereo/cd player.

My fc has the ebc in the blank din with a few other switches

 

I use a din pocket from my MX-6, but since you have stock stereo, you can mount it on the upper column cover if you don't already have a gauge pod there.

 

Took out the center console, stuck a piece of cardboard in the din panel square area. Cut holes in the card board, placed in gauges and boost controller. Resin/Bondo around the cardboard molding it to the rest of the center piece. Paint.

 

Thanks guys. Nothing posted quite suits Me but I'll figure it out and update when I'm done.

 

If it is the same size as the Profec B, type S, I put mine in the A/C slot under the steering wheel. It took about 10 minutes, fits absolutely perfectly, and is out of the way yet functional. (you will never miss the A/C slot functionality there).

 

crotch vent

Also seen a guy put it on the steering column.

 

Mine is in vent under steering column. Fits perfectly.