I searched....
#1
I searched....
and found nothing useful...
I am looking for black door panels for my 93 touring and I can't seem to find them anywhere.... The iplastic inserts on the drivers door were f'ed up when my alarm was installed and the pistol grip mounting bracket shattered to pieces for the passenger door.... Plus both panels in general are beat up from the previous owner. If anyone could help me out that would be cool.
I am looking for black door panels for my 93 touring and I can't seem to find them anywhere.... The iplastic inserts on the drivers door were f'ed up when my alarm was installed and the pistol grip mounting bracket shattered to pieces for the passenger door.... Plus both panels in general are beat up from the previous owner. If anyone could help me out that would be cool.
#2
FD Under Construction =P
iTrader: (5)
Check Fritz Flynn for the door panels.
You can buy a whole new passenger door panel for I believe $300 from Malloy Mazda, they are not cheap.
Check for the sale section also.
But if you want new parts, Malloy is the way go to.. its a bit pricey, but sometimes it's the only option unless you have a lot of patience and find them here.
You can buy a whole new passenger door panel for I believe $300 from Malloy Mazda, they are not cheap.
Check for the sale section also.
But if you want new parts, Malloy is the way go to.. its a bit pricey, but sometimes it's the only option unless you have a lot of patience and find them here.
Trending Topics
#8
Original Gangster/Rotary!
iTrader: (213)
Originally Posted by mazdatim
Thanks for the warning... I'm not un-accustomed to hearing HIGH price quotes so I'm sure I'll be fine...
#9
Well I have only been quoted the smog pump out of those, other things are like I was quoted over $1200 plus labor for new vacuum hoses, $1500 for gasket set (got it for 1/2 that), and I don't even remember how much the dealer wanted for a tune-up but I do remember laughing and hanging up..... I expected interior pieces to be a little spendy but to me it's worh it to be able to enjoy how my car looks inside. I can't stand looking at broken/cracked pieces of my door panels...
#10
Some suave individual needs to make full factory replicas of the door inserts out of alum. or carbon fiber.
As for the alum., Im talking to my brother who is part owner/boss of a Tool and Die company, who has a full C&C machine, plus a 250 ton press at his disposal. If I could just get him to make a die for the door inserts....I could get them done quickly in alum. /dream.
As for the alum., Im talking to my brother who is part owner/boss of a Tool and Die company, who has a full C&C machine, plus a 250 ton press at his disposal. If I could just get him to make a die for the door inserts....I could get them done quickly in alum. /dream.
Thread
Thread Starter
Forum
Replies
Last Post
RRTEC
2nd Generation Specific (1986-1992)
34
08-13-14 09:39 PM
Sniper_X
2nd Generation Specific (1986-1992)
22
03-27-08 11:35 PM
Apex944
2nd Generation Specific (1986-1992)
13
10-10-07 03:21 PM
JoshRX7
2nd Generation Specific (1986-1992)
7
02-04-06 01:38 PM