Going back to stock from 99 spec. I have obtained most of the major parts but what i am missing are all the plastic plugs/gromets, fasteners etc.

Any body that can help me out with different front end pics. Close ups....far way.....bumper skin off.....rebar shots on and off.....anything you can think of that might show all the fasteners, and brackets etc.

fasteners i need (pics of these sections).....

- Bumper mouth, along the bottom and top inside.

- Front air guide, ataches to the metal body/frame (skin would have to be off to see this. Its the thin plastic support guide sits inside the bumper mouth).

- horns, i need to see how a un molested set sits. I moved mine when i put the 99 spec bumper on and now i dont remember where they go.

- Fog lights, how they attach to the bumper/rebar?

****Please remember these pics must be from a unmolested car. I dont want pics if you are not sure if they are the proper OEM fasteners for the part/section.*****

much appreciated
shawn

 

The FSM/parts manual would be of much more help here. They have detailed schematics. Also, the collision supplement has detailed diagrams with all part numbers.

There are a surprising number of fastener types here and pictures will not necessarily tell you what they are.

 

I have the FSM and it does not give me details.....yes is shows a fastener going into a location, but what kind? Instead of sitting in my dealer for an hour trying to see what ones they are, this would help me a lot more....thats what the forums are for correct?

"A picture is worth a thousand words"

So, it would be much easyer for me if people just threw up pics of their cars, perhaps before they did tear downs. Or if they just ran into their garage quickly and snaped pics of the grommits used

So back to my help wanted add, thanx!

 

Well it is you lucky day I have it all apart and my car is stock.

 

PM me if you need more