3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

I figured out a FC Mount for ALL years FINALLY!

Thread Tools
 
Search this Thread
 
Old 06-18-06, 07:39 PM
  #1  
If it's fast I'm There

Thread Starter
iTrader: (24)
 
NVMYRX-7's Avatar
 
Join Date: Nov 2005
Location: Waxhaw, NC
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up I figured out a FC Mount for ALL years FINALLY!

To start I first posted about three months ago trying to figure out where to mount the FC in my 94 because the glove box is different from the 94 to the 93. I looked at a lot of different mount locations, but NONE of them allowed you to see the FC while driving including the cigarette mount (can't see when turning the steering wheel), cell phone mount (cheap looking), ash tray mount (who wants to look down at it), mounting to the right of the steering wheel (still can't see while driving for the steering wheel).


I searched the net and came across Proclip.com and the idea hit me. Check out the pic and tell me what you think. It swivels, you can detach it, doesn't block the AC, it doesn't vibrate under hard acceleration, only cost around $30.00, plus it's right in your face when you are driving which makes it easy to monitor.
Attached Thumbnails I figured out a FC Mount for ALL years FINALLY!-mount-long-view-pass.jpg   I figured out a FC Mount for ALL years FINALLY!-mount-close-up-front-resized-.jpg   I figured out a FC Mount for ALL years FINALLY!-mount-close-up-pass-resized-.jpg   I figured out a FC Mount for ALL years FINALLY!-mount-ds-resized-.jpg  

Last edited by NVMYRX-7; 06-18-06 at 07:58 PM. Reason: More Pics
Old 06-18-06, 07:58 PM
  #2  
Rotary Freak

iTrader: (1)
 
yuichiror's Avatar
 
Join Date: Oct 2003
Location: Hampton, Va
Posts: 2,506
Likes: 0
Received 0 Likes on 0 Posts
Umm, I'm going to velcro mine to the cig lighter so I can see it when I look at the gauges.
Old 06-18-06, 08:11 PM
  #3  
If it's fast I'm There

Thread Starter
iTrader: (24)
 
NVMYRX-7's Avatar
 
Join Date: Nov 2005
Location: Waxhaw, NC
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
Can't see it while driving

Originally Posted by NVMYRX-7
I looked at a lot of different mount locations, but NONE of them allowed you to see the FC while driving including the cigarette mount (can't see when turning the steering wheel)
I tried this mounting location but you can't see the display when you are driving and try going around a turn under boost while reading the display IMPOSSIBLE!!!!!
Old 06-18-06, 08:16 PM
  #4  
Rotary Freak

iTrader: (8)
 
Cgotto6's Avatar
 
Join Date: Nov 2003
Location: Bothell, Washington
Posts: 1,893
Received 2 Likes on 2 Posts
Originally Posted by NVMYRX-7
I tried this mounting location but you can't see the display when you are driving and try going around a turn under boost while reading the display IMPOSSIBLE!!!!!
Why are you taking corners under boost and trying to look at your gauges?
Old 06-18-06, 08:22 PM
  #5  
RX-7 Bad Ass

iTrader: (55)
 
DaleClark's Avatar
 
Join Date: Jan 2002
Location: Pensacola, FL
Posts: 15,399
Received 2,438 Likes on 1,509 Posts
Looks good!

I just REALLY wish Apexi would make a new commander! There's just no really good way to mount it, the screen sucks...it's just a crappy way to go. But, it's all we've got .

Dale
Old 06-18-06, 08:29 PM
  #6  
Broken FD

 
TurboTagTeam's Avatar
 
Join Date: Sep 2005
Location: Philadelphia
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
I hate the thing. It's so old looking. And the screen is really hard to see in the sunlight.
Old 06-18-06, 08:31 PM
  #7  
If it's fast I'm There

Thread Starter
iTrader: (24)
 
NVMYRX-7's Avatar
 
Join Date: Nov 2005
Location: Waxhaw, NC
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
Using car for what it was built for!!!

Originally Posted by Cgotto6
Why are you taking corners under boost and trying to look at your gauges?
First off it's MY CAR and I will drive it any way I like, second off is there are plenty of long curves that give you a chance to be under boost. I'm not talking about a 50mph tight curve; come on now of course I have more experience driving to attempt that stunt.
Old 06-18-06, 08:39 PM
  #8  
Rotary Freak

iTrader: (4)
 
Wompa164's Avatar
 
Join Date: Oct 2002
Location: Dallas, TX
Posts: 1,673
Received 10 Likes on 9 Posts
At most you should be glancing at boost gauge, not trying to read and decypher numbers off the commander in the middle of the turn.
Old 06-18-06, 09:30 PM
  #9  
If it's fast I'm There

Thread Starter
iTrader: (24)
 
NVMYRX-7's Avatar
 
Join Date: Nov 2005
Location: Waxhaw, NC
Posts: 852
Likes: 0
Received 0 Likes on 0 Posts
What about the mount?

Originally Posted by Wompa164
At most you should be glancing at boost gauge, not trying to read and decypher numbers off the commander in the middle of the turn.
I'm trying to get FEEDBACK ON THE MOUNT, not my driving.
Old 06-18-06, 09:34 PM
  #10  
Yea, I'm working on it...

 
Rotofire's Avatar
 
Join Date: Dec 2003
Location: Click click fucking click, Africa
Posts: 1,220
Likes: 0
Received 0 Likes on 0 Posts
It's cheap, it's clean looking.....but functionality? I'd have to see it in action.
Old 06-18-06, 09:41 PM
  #11  
Rotary Freak

iTrader: (8)
 
Cgotto6's Avatar
 
Join Date: Nov 2003
Location: Bothell, Washington
Posts: 1,893
Received 2 Likes on 2 Posts
Originally Posted by NVMYRX-7
I'm trying to get FEEDBACK ON THE MOUNT, not my driving.
And were giving feedback about a different mount that you said does not work well. The thing is, it does work well, it just doesnt work well for your driving style per say. No need to get all defensive, just seemed odd that somebody would be trying to read some little lettering while cornering "hard".
Old 06-18-06, 09:41 PM
  #12  
Broken FD

 
TurboTagTeam's Avatar
 
Join Date: Sep 2005
Location: Philadelphia
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Wompa164
At most you should be glancing at boost gauge, not trying to read and decypher numbers off the commander in the middle of the turn.
This is why peak and hold gauges are awesome. You can set them to flash a warning light when you go over a certain limit.
Old 06-18-06, 09:43 PM
  #13  
Rotary Freak

iTrader: (4)
 
Wompa164's Avatar
 
Join Date: Oct 2002
Location: Dallas, TX
Posts: 1,673
Received 10 Likes on 9 Posts
Originally Posted by NVMYRX-7
I'm trying to get FEEDBACK ON THE MOUNT, not my driving.
Ok, I think it sucks
Old 06-18-06, 09:52 PM
  #14  
Total Balance is Key

iTrader: (14)
 
Turbo II FC's Avatar
 
Join Date: Jul 2002
Location: Texas
Posts: 1,195
Likes: 0
Received 5 Likes on 4 Posts
I like the position its in, its just the mount doesnt look good at all.
Old 06-18-06, 09:59 PM
  #15  
HARDCORE chest Thumper!


iTrader: (19)
 
Adam P's Avatar
 
Join Date: Mar 2005
Location: Los Angeles
Posts: 757
Received 2 Likes on 2 Posts
hhaha i love people who buy fds they are always so worried about how their cars look
Old 06-18-06, 10:23 PM
  #16  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,529
Received 539 Likes on 326 Posts
Originally Posted by DarkEvilDrifter
hhaha i love people who buy fds they are always so worried about how their cars look
Nice stereotype, retard.
Old 06-18-06, 11:03 PM
  #17  
Senior Member

 
seanbrowning's Avatar
 
Join Date: Oct 2004
Location: the swamp, fl
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DarkEvilDrifter
hhaha i love people who buy fds they are always so worried about how their cars look
If we didn't care about how our cars look then we wouldn't own an FD jackass. Theres no reason to be reading your PFC while under boost. It is what it is, watching your intake temps and what not isn't going to change anything. Get a datalogit for that nonsense and see what lifes like AFTER you drive.

My PFC is going to be hidden, but accessible for if I need it, probably in the glove box. If I want to seem my A/F I would mount a wideband, and you should have easily read guages for temps/boost. :o
Old 06-19-06, 01:27 AM
  #18  
exhaust overheat

iTrader: (1)
 
windom's Avatar
 
Join Date: Nov 2005
Location: La Crosse, WI
Posts: 558
Likes: 0
Received 1 Like on 1 Post
I just velcro'd mine to my dash, right above the hazard light.

I used the industrial velcro, it and doesn't harm the plastic. This is rock solid, and has never fallen off. I can view it perfectly minus super sunny days from the driver's seat. It has survived being slammed into a pickup truck from the rear, so I think it'll hold out for guys with big turbos, or any accidents.
Attached Thumbnails I figured out a FC Mount for ALL years FINALLY!-img_1334.jpg  
Old 06-19-06, 07:21 AM
  #19  
development

 
dubulup's Avatar
 
Join Date: Aug 2002
Location: Lafayette, LA
Posts: 5,714
Likes: 0
Received 6 Likes on 5 Posts
anywhere you mount it; looks tacky...that should be stowed
Old 06-19-06, 07:30 AM
  #20  
King of the Duct Tape

 
airborne's Avatar
 
Join Date: Feb 2001
Location: PA
Posts: 1,177
Likes: 0
Received 0 Likes on 0 Posts
^^Agreed. Thief bait too, as if you needed more.

But when ya gotta see it any ~$10 cell phone holder will do.
Old 06-19-06, 07:30 AM
  #21  
Senior Member

 
SMonty's Avatar
 
Join Date: Nov 2005
Location: Calgary, AB
Posts: 451
Likes: 0
Received 0 Likes on 0 Posts
that thing is hideous. I would hide it and only take it out when no ones watching.
Old 06-19-06, 10:49 AM
  #22  
No it's not Turbo'd

 
DCrosby's Avatar
 
Join Date: Jun 2002
Location: Los Angeles, Ca
Posts: 2,511
Likes: 0
Received 2 Likes on 2 Posts
Problem Solved :


Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM



Quick Reply: I figured out a FC Mount for ALL years FINALLY!



All times are GMT -5. The time now is 10:55 AM.