I cant pull codes
#1
Slam Pig
Thread Starter
Join Date: Dec 2002
Location: New York
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
I cant pull codes
I searched and searched but this seems unique.
I got my harness back on my motor..got my battery wired back up and got my ecu back in. And I got power yay
Ok my car has no emmisions, is non seq has no abs no ac. So thats plenty of codes to pull.
I was hoping to pull the codes and figure out how things were and what I was missing..
I am following the ever so simple instructions of pulling codes and nothing....I have tried resetting things by taking off the negative terminal and nadda nothing.
And im not gonna drive the car with this ecu was just hoping to diagnose everything before I bought a apexi..
I got my harness back on my motor..got my battery wired back up and got my ecu back in. And I got power yay
Ok my car has no emmisions, is non seq has no abs no ac. So thats plenty of codes to pull.
I was hoping to pull the codes and figure out how things were and what I was missing..
I am following the ever so simple instructions of pulling codes and nothing....I have tried resetting things by taking off the negative terminal and nadda nothing.
And im not gonna drive the car with this ecu was just hoping to diagnose everything before I bought a apexi..
#6
ok when you turn the key to the on position the check engine light should come on. if not the ecu is not getting power or the bulb is burned or the connecton to the ecu is bad etc.. you gety the idea. if ity does not come on i would go look at the egi fuse by the battery
Trending Topics
#10
Slam Pig
Thread Starter
Join Date: Dec 2002
Location: New York
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Ok checked fuse (actually checked all of them) everything is good....
Update on this...The fans stopped that stupid thing of coming on when ever the battery was hooked up....Something needed a ground..
Still cant pull codes....
Update on this...The fans stopped that stupid thing of coming on when ever the battery was hooked up....Something needed a ground..
Still cant pull codes....
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM