3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

How do you eliminate....

Thread Tools
 
Search this Thread
 
Old Aug 3, 2004 | 10:12 PM
  #1  
KaiFD3S's Avatar
Thread Starter
SINFUL7
Tenured Member 15 Years
iTrader: (37)
 
Joined: Apr 2004
Posts: 6,574
Likes: 1
From: Alaska
How do you eliminate....

How do you eliminate the Cruise Control, I tried searching here and rob robinette's site and came up with nothing..

I just want to take out the mechanism since I have no use for it...
Reply
Old Aug 3, 2004 | 11:12 PM
  #2  
c00lduke's Avatar
Rotary Freak
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 2,360
Likes: 0
From: Overland Park, KS
take out that thing with the extra throttle cable that is to the right of you master cylinder. I think it has 3 bolt, 1 plug and that cable that easly comes off teh TB.
Reply
Old Aug 3, 2004 | 11:16 PM
  #3  
KaiFD3S's Avatar
Thread Starter
SINFUL7
Tenured Member 15 Years
iTrader: (37)
 
Joined: Apr 2004
Posts: 6,574
Likes: 1
From: Alaska
cool, it wont affect anything right? that's kinda what I thought when I was looking at it but I just wanted to be sure...thanks
Reply
Old Aug 4, 2004 | 08:19 AM
  #4  
dexmex88's Avatar
My FD Sucks
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 607
Likes: 0
From: Virginia
Originally Posted by c00lduke
take out that thing with the extra throttle cable that is to the right of you master cylinder. I think it has 3 bolt, 1 plug and that cable that easly comes off teh TB.
Any more details?
Reply
Old Aug 4, 2004 | 08:27 AM
  #5  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by dexmex88
Any more details?
There's nothing to it. You just remove the throttle cable off the throttle body. Disconnect the connector and unbolt it from the inside of the car.
Reply
Old Aug 4, 2004 | 08:33 AM
  #6  
airborne's Avatar
King of the Duct Tape
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 1,177
Likes: 0
From: PA
.

i just started unbolting anything that seemed attached and pulled the cable to the throttle. had to bash off that one plastic guide the cable from the CC goes through. best mod ever! well no not really but its a little cleaner.
Reply
Old Aug 16, 2004 | 07:47 PM
  #7  
dexmex88's Avatar
My FD Sucks
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 607
Likes: 0
From: Virginia
Sorry to bring a topic back from the dead, but you pull the throttle cable, and unbolt the thing in the engine bay. What do you unbolt from the inside of the car?(where is it located) What wires can I take out?
Reply
Old Aug 16, 2004 | 07:53 PM
  #8  
KaiFD3S's Avatar
Thread Starter
SINFUL7
Tenured Member 15 Years
iTrader: (37)
 
Joined: Apr 2004
Posts: 6,574
Likes: 1
From: Alaska
nothing from inside the car, just unplug the cc which is connected by the cc thingy
Reply
Old Aug 16, 2004 | 08:54 PM
  #9  
technonovice's Avatar
Jinx
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 1,260
Likes: 1
From: Raleigh, NC
Right, unless you want to pry off the cruise control buttons of the steering wheel. Pulling it out will lighten you about 8 ounces.
Reply
Old Aug 16, 2004 | 09:28 PM
  #10  
Mahjik's Avatar
Mr. Links
Tenured Member 20 Years
iTrader: (1)
 
Joined: Aug 2001
Posts: 27,595
Likes: 43
From: Kansas City, MO
Originally Posted by dexmex88
What do you unbolt from the inside of the car?(where is it located)
Sorry, "inside the car" refers to the engine bay, not the cockpit area.
Reply
Old Aug 16, 2004 | 09:36 PM
  #11  
broken93's Avatar
apex seal BBQ
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 867
Likes: 1
From: AL
Originally Posted by technonovice
Right, unless you want to pry off the cruise control buttons of the steering wheel. Pulling it out will lighten you about 8 ounces.
if that
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ejmack1
3rd Generation Specific (1993-2002)
5
Jan 5, 2002 08:57 AM




All times are GMT -5. The time now is 11:31 AM.