how do u add tranny oil after u drain it?
You need to pump it in through the filler hole under the car a little above midway on the tranny. There is a plug that you will need to back out. Pump it until you are level (Starts to pump out) with the bottom of the threaded plug hole.
Originally posted by legendr35
thanks! but what do i use to pump it with?
thanks! but what do i use to pump it with?
You can run a tube from the filler hole up through the engine bay and connect it to a funnel. I think Spyfish used a method similar to this. Be sure you use Redline in that tranny.
Last edited by Rated R1; Nov 30, 2001 at 07:56 AM.
Senior Member
Joined: Oct 2001
Posts: 291
Likes: 0
From: The 'Nati, Ohio
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
Aug 31, 2015 07:49 PM



