injectors no fit !?

Anyone happen to know what injectors I need and/or where to get them? RC Engineering?

It's a PFAB primary rail and Denso 720cc injectors (PART #195500-0830)

Thanks,
Cody

 

bump

 

the injectors fit- what problem(s) are you having with them exactly? they don't fit into the rail or into the block? etc

 

the rail, there are no o-rings and I wanted to be sure of the size/type needed.

also nothing other than the stock injector insulators are needed in the block right (it's been a while since I've had it apart)?

 

You'll most likely also need the small metal spacers that keith sells, they go around the bottom portion of the injector. I had accidentally bought 2 extras, PM me if you're interested and I can ship them out to ya. I think Keith charged me like 8 bucks each for them.

 

yeah i used something similar for the secondaries, wasn't sure if they were needed for the primaries.

You ahppen to have the o-rings too? or are you able to get them?

 

which o-rings are you referring to? I ordered new oem ones from malloy.

 

The o-rings are pretty standard, take rail and injecters to parts house and test fit. use antisieze or oil to help install in rail. I belive fc injecter o-ring fits. then install as per KG parts instructions.

 

Talking about injectors. Im thinking about getting 4 new 850cc injector mine are no good. So im plainning on getting 4- 850cc injector. Will i have a problem to fit them on my primarys or i gotta do some work it get it to fit.. Thanks

 

You have to get a modified primary rail.

 

You used oem FD o-rings for 720's? primary or secondary oem rings? what about the engine block side, there are currently no orings on that end. Do I need two orings per injectors plus the metal sleeve?