OverdoneRX7

Yes I know its hard to belive there is a hose question posted. I can't figure out what does this "port " go to. The port is on the back side of the block passenger side .Where does it go? Thanks Jim

quicksilver_rx7

It goes to the top nipple on the second solenoid from the firewall.

Vacuum Hose Diagram

OverdoneRX7

Thanks for the quick reply thats not the port I was talking about . The port is under the hose . You cant see it from the pic with all the markings in it . Look at the first photo the port with the red cap on it. I will try to take a better photo. Thanks Jim

OverdoneRX7

Pic 2

OverdoneRX7

Pic2 again

dgeesaman

iTrader: (7)

There is the FPR connection (orange in the linked diagram), and it runs to the top of Solenoid A (FPR Solenoid). There is also a connection to the manifold (bright blue in the diagram) that runs to a hard pipe running under solenoid A that eventually connects to the front connector of solenoid B.

Dave

bajaman

You're not talking about THIS port are you, the one that comes straight up out of the block that is used to attach the throttle body coolant hose to?

OverdoneRX7

Yup thats the one. This car came to me in a box of parts ( and tons of parts missing) .So if I got this right this hose goes to the thottle body? Thank again Jim

bajaman

lol....the reason your post stood out to me is because I sort of missed putting this hose on at the right time during my rebuild, so now it is kind of a bitch to get to.